merging changes from default branch.#9
Merged
Conversation
* slip: Fix memory leak in slip_open error path
[ Upstream commit 3b5a39979dafea9d0cd69c7ae06088f7a84cdafa ]
Driver/net/can/slcan.c is derived from slip.c. Memory leak was detected
by Syzkaller in slcan. Same issue exists in slip.c and this patch is
addressing the leak in slip.c.
Here is the slcan memory leak trace reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096):
comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s)
hex dump (first 32 bytes):
73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000a06eec0d>] __kmalloc+0x18b/0x2c0
[<0000000083306e66>] kvmalloc_node+0x3a/0xc0
[<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080
[<0000000061a996c9>] slcan_open+0x3ae/0x9a0
[<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0
[<0000000019289631>] tty_set_ldisc+0x28c/0x5f0
[<000000004de5a617>] tty_ioctl+0x48d/0x1590
[<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510
[<0000000059068dbc>] ksys_ioctl+0x99/0xb0
[<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0
[<0000000053d0332e>] do_syscall_64+0x16f/0x580
[<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<000000008ea75434>] 0xfffffffffffffff
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ax88172a: fix information leak on short answers
[ Upstream commit a9a51bd727d141a67b589f375fe69d0e54c4fe22 ]
If a malicious device gives a short MAC it can elicit up to
5 bytes of leaked memory out of the driver. We need to check for
ETH_ALEN instead.
Reported-by: syzbot+a8d4acdad35e6bbca308@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
commit e72b9dd6a5f17d0fb51f16f8685f3004361e83d0 upstream.
lower_dentry can't go from positive to negative (we have it pinned),
but it *can* go from negative to positive. So fetching ->d_inode
into a local variable, doing a blocking allocation, checking that
now ->d_inode is non-NULL and feeding the value we'd fetched
earlier to a function that won't accept NULL is not a good idea.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix missing error check at mixer resolution test
commit 167beb1756791e0806365a3f86a0da10d7a327ee upstream.
A check of the return value from get_cur_mix_raw() is missing at the
resolution test code in get_min_max_with_quirks(), which may leave the
variable untouched, leading to a random uninitialized value, as
detected by syzkaller fuzzer.
Add the missing return error check for fixing that.
Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: not submit urb for stopped endpoint
commit 528699317dd6dc722dccc11b68800cf945109390 upstream.
While output urb's snd_complete_urb() is executing, calling
prepare_outbound_urb() may cause endpoint stopped before
prepare_outbound_urb() returns and result in next urb submitted
to stopped endpoint. usb-audio driver cannot re-use it afterwards as
the urb is still hold by usb stack.
This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again
to let snd_complete_urb() know the endpoint already stopped and does not
submit next urb. Below kind of error will be fixed:
[ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1
[ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error
Signed-off-by: Henry Lin <henryl@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: ff-memless - kill timer in destroy()
commit fa3a5a1880c91bb92594ad42dfe9eedad7996b86 upstream.
No timer must be left running when the device goes away.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-and-tested-by: syzbot+b6c55daa701fc389e286@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1573726121.17351.3.camel@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
commit 762c69685ff7ad5ad7fee0656671e20a0c9c864d upstream.
We need to get the underlying dentry of parent; sure, absent the races
it is the parent of underlying dentry, but there's nothing to prevent
losing a timeslice to preemtion in the middle of evaluation of
lower_dentry->d_parent->d_inode, having another process move lower_dentry
around and have its (ex)parent not pinned anymore and freed on memory
pressure. Then we regain CPU and try to fetch ->d_inode from memory
that is freed by that point.
dentry->d_parent *is* stable here - it's an argument of ->lookup() and
we are guaranteed that it won't be moved anywhere until we feed it
to d_add/d_splice_alias. So we safely go that way to get to its
underlying dentry.
Cc: stable@vger.kernel.org # since 2009 or so
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros
commit 4e7120d79edb31e4ee68e6f8421448e4603be1e9 upstream.
For both PASID-based-Device-TLB Invalidate Descriptor and
Device-TLB Invalidate Descriptor, the Physical Function Source-ID
value is split according to this layout:
PFSID[3:0] is set at offset 12 and PFSID[15:4] is put at offset 52.
Fix the part laid out at offset 52.
Fixes: 0f725561e1684 ("iommu/vt-d: Add definitions for PFSID")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org # v4.19+
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
commit 00d484f354d85845991b40141d40ba9e5eb60faf upstream.
We've encountered a rcu stall in get_mem_cgroup_from_mm():
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 33-....: (21000 ticks this GP) idle=6c6/1/0x4000000000000002 softirq=35441/35441 fqs=5017
(t=21031 jiffies g=324821 q=95837) NMI backtrace for cpu 33
<...>
RIP: 0010:get_mem_cgroup_from_mm+0x2f/0x90
<...>
__memcg_kmem_charge+0x55/0x140
__alloc_pages_nodemask+0x267/0x320
pipe_write+0x1ad/0x400
new_sync_write+0x127/0x1c0
__kernel_write+0x4f/0xf0
dump_emit+0x91/0xc0
writenote+0xa0/0xc0
elf_core_dump+0x11af/0x1430
do_coredump+0xc65/0xee0
get_signal+0x132/0x7c0
do_signal+0x36/0x640
exit_to_usermode_loop+0x61/0xd0
do_syscall_64+0xd4/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The problem is caused by an exiting task which is associated with an
offline memcg. We're iterating over and over in the do {} while
(!css_tryget_online()) loop, but obviously the memcg won't become online
and the exiting task won't be migrated to a live memcg.
Let's fix it by switching from css_tryget_online() to css_tryget().
As css_tryget_online() cannot guarantee that the memcg won't go offline,
the check is usually useless, except some rare cases when for example it
determines if something should be presented to a user.
A similar problem is described by commit 18fa84a2db0e ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Johannes:
: The bug aside, it doesn't matter whether the cgroup is online for the
: callers. It used to matter when offlining needed to evacuate all charges
: from the memcg, and so needed to prevent new ones from showing up, but we
: don't care now.
Link: http://lkml.kernel.org/r/20191106225131.3543616-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeeb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
commit 0362f326d86c645b5e96b7dbc3ee515986ed019d upstream.
An exiting task might belong to an offline cgroup. In this case an
attempt to grab a cgroup reference from the task can end up with an
infinite loop in hugetlb_cgroup_charge_cgroup(), because neither the
cgroup will become online, neither the task will be migrated to a live
cgroup.
Fix this by switching over to css_tryget(). As css_tryget_online()
can't guarantee that the cgroup won't go offline, in most cases the
check doesn't make sense. In this particular case users of
hugetlb_cgroup_charge_cgroup() are not affected by this change.
A similar problem is described by commit 18fa84a2db0e ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Link: http://lkml.kernel.org/r/20191106225131.3543616-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iio: dac: mcp4922: fix error handling in mcp4922_write_raw
[ Upstream commit 0833627fc3f757a0dca11e2a9c46c96335a900ee ]
Do not try to write negative values and make sure that the write goes well.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: pcm: signedness bug in snd_pcm_plug_alloc()
[ Upstream commit 6f128fa41f310e1f39ebcea9621d2905549ecf52 ]
The "frames" variable is unsigned so the error handling doesn't work
properly.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* mmc: sdhci-of-at91: fix quirk2 overwrite
commit fed23c5829ecab4ddc712d7b0046e59610ca3ba4 upstream.
The quirks2 are parsed and set (e.g. from DT) before the quirk for broken
HS200 is set in the driver.
The driver needs to enable just this flag, not rewrite the whole quirk set.
Fixes: 7871aa60ae00 ("mmc: sdhci-of-at91: add quirk for broken HS200")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gfs2: Don't set GFS2_RDF_UPTODATE when the lvb is updated
[ Upstream commit 4f36cb36c9d14340bb200d2ad9117b03ce992cfe ]
The GFS2_RDF_UPTODATE flag in the rgrp is used to determine when
a rgrp buffer is valid. It's cleared when the glock is invalidated,
signifying that the buffer data is now invalid. But before this
patch, function update_rgrp_lvb was setting the flag when it
determined it had a valid lvb. But that's an invalid assumption:
just because you have a valid lvb doesn't mean you have valid
buffers. After all, another node may have made the lvb valid,
and this node just fetched it from the glock via dlm.
Consider this scenario:
1. The file system is mounted with RGRPLVB option.
2. In gfs2_inplace_reserve it locks the rgrp glock EX, but thanks
to GL_SKIP, it skips the gfs2_rgrp_bh_get.
3. Since loops == 0 and the allocation target (ap->target) is
bigger than the largest known chunk of blocks in the rgrp
(rs->rs_rbm.rgd->rd_extfail_pt) it skips that rgrp and bypasses
the call to gfs2_rgrp_bh_get there as well.
4. update_rgrp_lvb sees the lvb MAGIC number is valid, so bypasses
gfs2_rgrp_bh_get, but it still sets sets GFS2_RDF_UPTODATE due
to this invalid assumption.
5. The next time update_rgrp_lvb is called, it sees the bit is set
and just returns 0, assuming both the lvb and rgrp are both
uptodate. But since this is a smaller allocation, or space has
been freed by another node, thus adjusting the lvb values,
it decides to use the rgrp for allocations, with invalid rd_free
due to the fact it was never updated.
This patch changes update_rgrp_lvb so it doesn't set the UPTODATE
flag anymore. That way, it has no choice but to fetch the latest
values.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45
[ Upstream commit 10af10db8c76fa5b9bf1f52a895c1cb2c0ac24da ]
Fix a typo. No functional change made by this patch.
Signed-off-by: Jay Foster <jayfoster@ieee.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: seq: Do error checks at creating system ports
[ Upstream commit b8e131542b47b81236ecf6768c923128e1f5db6e ]
snd_seq_system_client_init() doesn't check the errors returned from
its port creations. Let's do it properly and handle the error paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: exynos: Fix sound in Snow-rev5 Chromebook
[ Upstream commit 64858773d78e820003a94e5a7179d368213655d6 ]
This patch adds missing properties to the CODEC and sound nodes, so the
audio will work also on Snow rev5 Chromebook. This patch is an extension
to the commit e9eefc3f8ce0 ("ARM: dts: exynos: Add missing clock and
DAI properties to the max98095 node in Snow Chromebook")
and commit 6ab569936d60 ("ARM: dts: exynos: Enable HDMI audio on Snow
Chromebook"). It has been reported that such changes work fine on the
rev5 board too.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[krzk: Fixed typo in phandle to &max98090]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3
[ Upstream commit feef7918667b84f9d5653c501542dd8d84ae32af ]
Setting GPIO 21 high seems to be required to enable power to USB ports
on the WNDR3400v3. As there is already similar code for WNR3500L,
make the existing USB power GPIO code generic and use that.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20259/
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ASoC: dpcm: Properly initialise hw->rate_max
[ Upstream commit e33ffbd9cd39da09831ce62c11025d830bf78d9e ]
If the CPU DAI does not initialise rate_max, say if using
using KNOT or CONTINUOUS, then the rate_max field will be
initialised to 0. A value of zero in the rate_max field of
the hardware runtime will cause the sound card to support no
sample rates at all. Obviously this is not desired, just a
different mechanism is being used to apply the constraints. As
such update the setting of rate_max in dpcm_init_runtime_hw
to be consistent with the non-DPCM cases and set rate_max to
UINT_MAX if nothing is defined on the CPU DAI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: use correct length for strncpy
[ Upstream commit 7eb74ff891b4e94b8bac48f648a21e4b94ddee64 ]
Caught by GCC 8. When we provide a length for strncpy, we should not
include the terminating null. So we must tell it one less than the size
of the destination buffer.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: hold the rtnl lock on clearing interrupt scheme
[ Upstream commit 5cba17b14182696d6bb0ec83a1d087933f252241 ]
Hold the rtnl lock when we're clearing interrupt scheme
in i40e_shutdown and in i40e_remove.
Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* rtl8187: Fix warning generated when strncpy() destination length matches the sixe argument
[ Upstream commit 199ba9faca909e77ac533449ecd1248123ce89e7 ]
In gcc8, when the 3rd argument (size) of a call to strncpy() matches the
length of the first argument, the compiler warns of the possibility of an
unterminated string. Using strlcpy() forces a null at the end.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: Prevent deleting MAC address from VF when set by PF
[ Upstream commit 5907cf6c5bbe78be2ed18b875b316c6028b20634 ]
To prevent VF from deleting MAC address that was assigned by the
PF we need to check for that scenario when we try to delete a MAC
address from a VF.
Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: pxa: fix power i2c base address
[ Upstream commit 8a1ecc01a473b75ab97be9b36f623e4551a6e9ae ]
There is one too many zeroes in the Power I2C base address. Fix this.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: lan78xx: Bail out if lan78xx_get_endpoints fails
[ Upstream commit fa8cd98c06407b5798b927cd7fd14d30f360ed02 ]
We need to bail out if lan78xx_get_endpoints() fails, otherwise the
result is overwritten.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Raghuram Chary Jallipalli <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ath10k: wmi: disable softirq's while calling ieee80211_rx
[ Upstream commit 37f62c0d5822f631b786b29a1b1069ab714d1a28 ]
This is done in order not to trig the below warning in
ieee80211_rx_napi:
WARN_ON_ONCE(softirq_count() == 0);
ieee80211_rx_napi requires that softirq's are disabled during
execution.
The High latency bus drivers (SDIO and USB) sometimes call the wmi
ep_rx_complete callback from non softirq context, resulting in a trigger
of the above warning.
Calling ieee80211_rx_ni with softirq's already disabled (e.g., from
softirq context) should be safe as the local_bh_disable and
local_bh_enable functions (called from ieee80211_rx_ni) are fully
reentrant.
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* mips: txx9: fix iounmap related issue
[ Upstream commit c6e1241a82e6e74d1ae5cc34581dab2ffd6022d0 ]
if device_register return error, iounmap should be called, also iounmap
need to call before put_device.
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20476/
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ASoC: sgtl5000: avoid division by zero if lo_vag is zero
[ Upstream commit 9ab708aef61f5620113269a9d1bdb1543d1207d0 ]
In the case where lo_vag <= SGTL5000_LINE_OUT_GND_BASE, lo_vag
is set to zero and later vol_quot is computed by dividing by
lo_vag causing a division by zero error. Fix this by avoiding
a zero division and set vol_quot to zero in this specific case
so that the lowest setting for i is correctly set.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files
[ Upstream commit fa0d7dc355c890725b6178dab0cc11b194203afa ]
needed for device variants based on GTA04 board but with
different display panel (driver).
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: omap3-gta04: tvout: enable as display1 alias
[ Upstream commit 8905592b6e50cec905e6c6035bbd36201a3bfac1 ]
The omap dss susbystem takes the display aliases to find
out which displays exist. To enable tv-out we must define
an alias.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* of: make PowerMac cache node search conditional on CONFIG_PPC_PMAC
[ Upstream commit f6707fd6241e483f6fea2caae82d876e422bb11a ]
Cache nodes under the cpu node(s) is PowerMac specific according to the
comment above, so make the code enforce that.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
[ Upstream commit fa99c21ecb3cd4021a60d0e8bf880e78b5bd0729 ]
Vendor defined U-Boot has changed the partition scheme a while ago:
* kernel partition 6MB
* file system partition uses the remainder up to end of the NAND
* increased size of the environment partition (to get an OneNAND compatible base address)
* shrink the U-Boot partition
Let's be compatible (e.g. Debian kernel built from upstream).
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: omap3-gta04: keep vpll2 always on
[ Upstream commit 1ae00833e30c9b4af5cbfda65d75b1de12f74013 ]
This is needed to make the display and venc work properly.
Compare to omap3-beagle.dts.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* dmaengine: dma-jz4780: Further residue status fix
[ Upstream commit 83ef4fb7556b6a673f755da670cbacab7e2c7f1b ]
Func jz4780_dma_desc_residue() expects the index to the next hw
descriptor as its last parameter. Caller func jz4780_dma_tx_status(),
however, applied modulus before passing it. When the current hw
descriptor was last in the list, the index passed became zero.
The resulting excess of reported residue especially caused problems
with cyclic DMA transfer clients, i.e. ALSA AIC audio output, which
rely on this for determining current DMA location within buffer.
Combined with the recent and related residue-reporting fixes, spurious
ALSA audio underruns on jz4770 hardware are now fixed.
Signed-off-by: Daniel Silsby <dansilsby@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* signal: Always ignore SIGKILL and SIGSTOP sent to the global init
[ Upstream commit 86989c41b5ea08776c450cb759592532314a4ed6 ]
If the first process started (aka /sbin/init) receives a SIGKILL it
will panic the system if it is delivered. Making the system unusable
and undebugable. It isn't much better if the first process started
receives SIGSTOP.
So always ignore SIGSTOP and SIGKILL sent to init.
This is done in a separate clause in sig_task_ignored as force_sig_info
can clear SIG_UNKILLABLE and this protection should work even then.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* signal: Properly deliver SIGILL from uprobes
[ Upstream commit 55a3235fc71bf34303e34a95eeee235b2d2a35dd ]
For userspace to tell the difference between a random signal and an
exception, the exception must include siginfo information.
Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result
in userspace seeing si_code == SI_USER (like a random signal) instead
of si_code == SI_KERNEL or a more specific si_code as all exceptions
deliver.
Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current)
with force_sig(SIG_ILL, current) which gets this right and is
shorter and easier to type.
Fixes: 014940bad8e4 ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails")
Fixes: 0b5256c7f173 ("uprobes: Send SIGILL if handle_trampoline() fails")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* signal: Properly deliver SIGSEGV from x86 uprobes
[ Upstream commit 4a63c1ffd384ebdce40aac9c997dab68379137be ]
For userspace to tell the difference between an random signal
and an exception, the exception must include siginfo information.
Using SEND_SIG_FORCED for SIGSEGV is thus wrong, and it will result in
userspace seeing si_code == SI_USER (like a random signal) instead of
si_code == SI_KERNEL or a more specific si_code as all exceptions
deliver.
Therefore replace force_sig_info(SIGSEGV, SEND_SIG_FORCE, current)
with force_sig(SIG_SEGV, current) which gets this right and is shorter
and easier to type.
Fixes: 791eca10107f ("uretprobes/x86: Hijack return address")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
[ Upstream commit 8148d2136002da2e2887caf6a07bbd9c033f14f3 ]
One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3. SoC is programming PMIC for power off when standby is asserted.
4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.
See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083
This patch implements step 4. of this sequence.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()
[ Upstream commit 288315e95264b6355e26609e9dec5dc4563d4ab0 ]
sym_int_sir() in sym_hipd.c does not check the command pointer for NULL before
using it in debug message prints.
Suggested-by: Matthew Wilcox <matthew.wilcox@oracle.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Acked-by: Matthew Wilcox <matthew.wilcox@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: pm80xx: Corrected dma_unmap_sg() parameter
[ Upstream commit 76cb25b058034d37244be6aca97a2ad52a5fbcad ]
For the function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatter list prior to the mapping, not after the mapping.
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* nvmem: core: return error code instead of NULL from nvmem_device_get
[ Upstream commit ca6ac25cecf0e740d7cc8e03e0ebbf8acbeca3df ]
nvmem_device_get() should return ERR_PTR() on error or valid pointer
on success, but one of the code path seems to return NULL, so fix it.
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: pm80xx: Fixed system hang issue during kexec boot
[ Upstream commit 72349b62a571effd6faadd0600b8e657dd87afbf ]
When the firmware is not responding, execution of kexec boot causes a system
hang. When firmware assertion happened, driver get notified with interrupt
vector updated in MPI configuration table. Then, the driver will read
scratchpad register and set controller_fatal_error flag to true.
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* kprobes: Don't call BUG_ON() if there is a kprobe in use on free list
[ Upstream commit cbdd96f5586151e48317d90a403941ec23f12660 ]
Instead of calling BUG_ON(), if we find a kprobe in use on free kprobe
list, just remove it from the list and keep it on kprobe hash list
as same as other in-use kprobes.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666126882.21306.10738207224288507996.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: fix: media: pci: meye: validate offset to avoid arbitrary access
[ Upstream commit eac7230fdb4672c2cb56f6a01a1744f562c01f80 ]
Motion eye video4linux driver for Sony Vaio PictureBook desn't validate user-controlled parameter
'vma->vm_pgoff', a malicious process might access all of kernel memory from user space by trying
pass different arbitrary address.
Discussion: http://www.openwall.com/lists/oss-security/2018/07/06/1
Signed-off-by: Lao Wei <zrlw@qq.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: intel8x0m: Register irq handler after register initializations
[ Upstream commit 7064f376d4a10686f51c879401a569bb4babf9c6 ]
The interrupt handler has to be acquired after the other resource
initialization when allocated with IRQF_SHARED. Otherwise it's
triggered before the resource gets ready, and may lead to unpleasant
behavior.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* pinctrl: at91-pio4: fix has_config check in atmel_pctl_dt_subnode_to_map()
[ Upstream commit b97760ae8e3dc8bb91881c13425a0bff55f2bd85 ]
Smatch complains about this condition:
if (has_config && num_pins >= 1)
The "has_config" variable is either uninitialized or true. The
"num_pins" variable is unsigned and we verified that it is non-zero on
the lines before so we know "num_pines >= 1" is true. Really, we could
just check "num_configs" directly and remove the "has_config" variable.
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* llc: avoid blocking in llc_sap_close()
[ Upstream commit 9708d2b5b7c648e8e0a40d11e8cea12f6277f33c ]
llc_sap_close() is called by llc_sap_put() which
could be called in BH context in llc_rcv(). We can't
block in BH.
There is no reason to block it here, kfree_rcu() should
be sufficient.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/vdso: Correct call frame information
[ Upstream commit 56d20861c027498b5a1112b4f9f05b56d906fdda ]
Call Frame Information is used by gdb for back-traces and inserting
breakpoints on function return for the "finish" command. This failed
when inside __kernel_clock_gettime. More concerning than difficulty
debugging is that CFI is also used by stack frame unwinding code to
implement exceptions. If you have an app that needs to handle
asynchronous exceptions for some reason, and you are unlucky enough to
get one inside the VDSO time functions, your app will crash.
What's wrong: There is control flow in __kernel_clock_gettime that
reaches label 99 without saving lr in r12. CFI info however is
interpreted by the unwinder without reference to control flow: It's a
simple matter of "Execute all the CFI opcodes up to the current
address". That means the unwinder thinks r12 contains the return
address at label 99. Disabuse it of that notion by resetting CFI for
the return address at label 99.
Note that the ".cfi_restore lr" could have gone anywhere from the
"mtlr r12" a few instructions earlier to the instruction at label 99.
I put the CFI as late as possible, because in general that's best
practice (and if possible grouped with other CFI in order to reduce
the number of CFI opcodes executed when unwinding). Using r12 as the
return address is perfectly fine after the "mtlr r12" since r12 on
that code path still contains the return address.
__get_datapage also has a CFI error. That function temporarily saves
lr in r0, and reflects that fact with ".cfi_register lr,r0". A later
use of r0 means the CFI at that point isn't correct, as r0 no longer
contains the return address. Fix that too.
Signed-off-by: Alan Modra <amodra@gmail.com>
Tested-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: socfpga: Fix I2C bus unit-address error
[ Upstream commit cbbc488ed85061a765cf370c3e41f383c1e0add6 ]
dtc has new checks for I2C buses. Fix the warnings in unit-addresses.
arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@ffc04000/adxl345@0: I2C bus unit address format error, expected "53"
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* power: supply: ab8500_fg: silence uninitialized variable warnings
[ Upstream commit 54baff8d4e5dce2cef61953b1dc22079cda1ddb1 ]
If kstrtoul() fails then we print "charge_full" when it's uninitialized.
The debug printk doesn't add anything so I deleted it and cleaned these
two functions up a bit.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* pinctrl: at91: don't use the same irqchip with multiple gpiochips
[ Upstream commit 0c3dfa176912b5f87732545598200fb55e9c1978 ]
Sharing the same irqchip with multiple gpiochips is not a good
practice. For instance, when installing hooks, we change the state
of the irqchip. The initial state of the irqchip for the second
gpiochip to register is then disrupted.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* cxgb4: Fix endianness issue in t4_fwcache()
[ Upstream commit 0dc235afc59a226d951352b0adf4a89b532a9d13 ]
Do not put host-endian 0 or 1 into big endian feild.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* kernfs: Fix range checks in kernfs_get_target_path
[ Upstream commit a75e78f21f9ad4b810868c89dbbabcc3931591ca ]
The terminating NUL byte is only there because the buffer is
allocated with kzalloc(PAGE_SIZE, GFP_KERNEL), but since the
range-check is off-by-one, and PAGE_SIZE==PATH_MAX, the
returned string may not be zero-terminated if it is exactly
PATH_MAX characters long. Furthermore also the initial loop
may theoretically exceed PATH_MAX and cause a fault.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* power: supply: max8998-charger: Fix platform data retrieval
[ Upstream commit cb90a2c6f77fe9b43d1e3f759bb2f13fe7fa1811 ]
Since the max8998 MFD driver supports instantiation by DT, platform data
retrieval is handled in MFD probe and cell drivers should get use
the pdata field of max8998_dev struct to obtain them.
Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree")
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* s390/qeth: invoke softirqs after napi_schedule()
[ Upstream commit 4d19db777a2f32c9b76f6fd517ed8960576cb43e ]
Calling napi_schedule() from process context does not ensure that the
NET_RX softirq is run in a timely fashion. So trigger it manually.
This is no big issue with current code. A call to ndo_open() is usually
followed by a ndo_set_rx_mode() call, and for qeth this contains a
spin_unlock_bh(). Except for OSN, where qeth_l2_set_rx_mode() bails out
early.
Nevertheless it's best to not depend on this behaviour, and just fix
the issue at its source like all other drivers do. For instance see
commit 83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule").
Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* serial: mxs-auart: Fix potential infinite loop
[ Upstream commit 5963e8a3122471cadfe0eba41c4ceaeaa5c8bb4d ]
On the error path of mxs_auart_request_gpio_irq() is performed
backward iterating with index i of enum type. Underline enum type
may be unsigned char. In this case check (--i >= 0) will be always
true and error handling goes into infinite loop.
The patch changes the check so that it is valid for signed and unsigned
types.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/ACPI: Correct error message for ASPM disabling
[ Upstream commit 1ad61b612b95980a4d970c52022aa01dfc0f6068 ]
If _OSC execution fails today for platforms without an _OSC entry, code is
printing a misleading message saying disabling ASPM as follows:
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
We need to ensure that platform supports ASPM to begin with.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/iommu: Avoid derefence before pointer check
[ Upstream commit 984ecdd68de0fa1f63ce205d6c19ef5a7bc67b40 ]
The tbl pointer is being derefenced by IOMMU_PAGE_SIZE prior the check
if it is not NULL.
Just moving the dereference code to after the check, where there will
be guarantee that 'tbl' will not be NULL.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/64s/hash: Fix stab_rr off by one initialization
[ Upstream commit 09b4438db13fa83b6219aee5993711a2aa2a0c64 ]
This causes SLB alloation to start 1 beyond the start of the SLB.
There is no real problem because after it wraps it stats behaving
properly, it's just surprisig to see when looking at SLB traces.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* libfdt: Ensure INT_MAX is defined in libfdt_env.h
[ Upstream commit 53dd9dce6979bc54d64a3a09a2fb20187a025be7 ]
The next update of libfdt has a new dependency on INT_MAX. Update the
instances of libfdt_env.h in the kernel to either include the necessary
header with the definition or define it locally.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/pseries: Disable CPU hotplug across migrations
[ Upstream commit 85a88cabad57d26d826dd94ea34d3a785824d802 ]
When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.
During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.
To prevent this this patch disables CPU hotplug during the migration
process.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* power: supply: twl4030_charger: disable eoc interrupt on linear charge
[ Upstream commit 079cdff3d0a09c5da10ae1be35def7a116776328 ]
This avoids getting woken up from suspend after power interruptions
when the bci wrongly thinks the battery is full just because
of input current going low because of low input power
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* power: supply: twl4030_charger: fix charging current out-of-bounds
[ Upstream commit 8314c212f995bc0d06b54ad02ef0ab4089781540 ]
the charging current uses unsigned int variables, if we step back
if the current is still low, we would run into negative which
means setting the target to a huge value.
Better add checks here.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: toshiba: fix return type of ndo_start_xmit function
[ Upstream commit bacade822524e02f662d88f784d2ae821a5546fb ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: xilinx: fix return type of ndo_start_xmit function
[ Upstream commit 81255af8d9d5565004792c295dde49344df450ca ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: broadcom: fix return type of ndo_start_xmit function
[ Upstream commit 0c13b8d1aee87c35a2fbc1d85a1f766227cf54b5 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: chipidea: Fix otg event handler
[ Upstream commit 59739131e0ca06db7560f9073fff2fb83f6bc2a5 ]
At OTG work running time, it's possible that several events need to be
addressed (e.g. ID and VBUS events). The current implementation handles
only one event at a time which leads to ignoring the other one. Fix it.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: am335x-evm: fix number of cpsw
[ Upstream commit dcbf6b18d81bcdc51390ca1b258c17e2e13b7d0c ]
am335x-evm has only one CPSW external port physically wired, but DT defines
2 ext. ports. As result, PHY connection failure reported for the second
ext. port.
Update DT to reflect am335x-evm board HW configuration, and, while here,
switch to use phy-handle instead of phy_id.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: amd: fix return type of ndo_start_xmit function
[ Upstream commit fe72352e37ae8478f4c97975a9831f0c50f22e73 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: ux500: Correct SCU unit address
[ Upstream commit 2f217d24ecaec2012e628d21e244eef0608656a4 ]
The unit address of the Cortex-A9 SCU device node contains one zero too
many. Remove it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: ux500: Fix LCDA clock line muxing
[ Upstream commit ecde29569e3484e1d0a032bf4074449bce4d4a03 ]
The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: ste: Fix SPI controller node names
[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* cpufeature: avoid warning when compiling with clang
[ Upstream commit c785896b21dd8e156326ff660050b0074d3431df ]
The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to warnings when building the kernel with Clang:
arch/arm/crypto/aes-ce-glue.c:450:1: warning: variable
'cpu_feature_match_AES' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
module_cpu_feature_match(AES, aes_init);
^
Avoid warnings by using __maybe_unused, similar to commit 1f318a8bafcf
("modules: mark __inittest/__exittest as __maybe_unused").
Fixes: 67bad2fdb754 ("cpu: add generic support for CPU feature based module autoloading")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnx2x: Ignore bandwidth attention in single function mode
[ Upstream commit 75a110a1783ef8324ffd763b24f4ac268253cbca ]
This is a workaround for FW bug -
MFW generates bandwidth attention in single function mode, which
is only expected to be generated in multi function mode.
This undesired attention in SF mode results in incorrect HW
configuration and resulting into Tx timeout.
Signed-off-by: Shahed Shaikh <Shahed.Shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: micrel: fix return type of ndo_start_xmit function
[ Upstream commit 2b49117a5abee8478b0470cba46ac74f93b4a479 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* x86/CPU: Use correct macros for Cyrix calls
[ Upstream commit 03b099bdcdf7125d4a63dc9ddeefdd454e05123d ]
There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:
outb(CX86_CCR2, 0x22);
inb(0x23);
From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jia Zhang <qianyue.zj@alibaba-inc.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180921212041.13096-2-tedheadster@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: uvc: configfs: Drop leaked references to config items
[ Upstream commit 86f3daed59bceb4fa7981d85e89f63ebbae1d561 ]
Some of the .allow_link() and .drop_link() operations implementations
call config_group_find_item() and then leak the reference to the
returned item. Fix this by dropping those references where needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: pci: ivtv: Fix a sleep-in-atomic-context bug in ivtv_yuv_init()
[ Upstream commit 8d11eb847de7d89c2754988c944d51a4f63e219b ]
The driver may sleep in a interrupt handler.
The function call paths (from bottom to top) in Linux-4.16 are:
[FUNC] kzalloc(GFP_KERNEL)
drivers/media/pci/ivtv/ivtv-yuv.c, 938:
kzalloc in ivtv_yuv_init
drivers/media/pci/ivtv/ivtv-yuv.c, 960:
ivtv_yuv_init in ivtv_yuv_next_free
drivers/media/pci/ivtv/ivtv-yuv.c, 1126:
ivtv_yuv_next_free in ivtv_yuv_setup_stream_frame
drivers/media/pci/ivtv/ivtv-irq.c, 827:
ivtv_yuv_setup_stream_frame in ivtv_irq_dec_data_req
drivers/media/pci/ivtv/ivtv-irq.c, 1013:
ivtv_irq_dec_data_req in ivtv_irq_handler
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* MIPS: kexec: Relax memory restriction
[ Upstream commit a6da4d6fdf8bd512c98d3ac7f1d16bc4bb282919 ]
We can rely on the system kernel and the dump capture kernel themselves in
memory usage.
Being restrictive with 512MB limit may cause kexec tool failure on some
platforms.
Tested-by: Rachel Mozes <rachel.mozes@intel.com>
Reported-by: Rachel Mozes <rachel.mozes@intel.com>
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20568/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: davinci: Fix implicit enum conversion warning
[ Upstream commit 4158757395b300b6eb308fc20b96d1d231484413 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/media/platform/davinci/vpbe_display.c:524:24: warning: implicit
conversion from enumeration type 'enum osd_v_exp_ratio' to different
enumeration type 'enum osd_h_exp_ratio' [-Wenum-conversion]
layer_info->h_exp = V_EXP_6_OVER_5;
~ ^~~~~~~~~~~~~~
1 warning generated.
This appears to be a copy and paste error judging from the couple of
lines directly above this statement and the way that height is handled
in the if block above this one.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: uvc: configfs: Prevent format changes after linking header
[ Upstream commit cb2200f7af8341aaf0c6abd7ba37e4c667c41639 ]
While checks are in place to avoid attributes and children of a format
being manipulated after the format is linked into the streaming header,
the linked flag was never actually set, invalidating the protections.
Update the flag as appropriate in the header link calls.
Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: uvc: Factor out video USB request queueing
[ Upstream commit 9d1ff5dcb3cd3390b1e56f1c24ae42c72257c4a3 ]
USB requests for video data are queued from two different locations in
the driver, with the same code block occurring twice. Factor it out to a
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: uvc: Only halt video streaming endpoint in bulk mode
[ Upstream commit 8dbf9c7abefd5c1434a956d5c6b25e11183061a3 ]
When USB requests for video data fail to be submitted, the driver
signals a problem to the host by halting the video streaming endpoint.
This is only valid in bulk mode, as isochronous transfers have no
handshake phase and can't thus report a stall. The usb_ep_set_halt()
call returns an error when using isochronous endpoints, which we happily
ignore, but some UDCs complain in the kernel log. Fix this by only
trying to halt the endpoint in bulk mode.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* misc: kgdbts: Fix restrict error
[ Upstream commit fa0218ef733e6f247a1a3986e3eb12460064ac77 ]
kgdbts current fails when compiled with restrict:
drivers/misc/kgdbts.c: In function ‘configure_kgdbts’:
drivers/misc/kgdbts.c:1070:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict]
strcpy(config, opt);
^~~~~~~~~~~~~~~~~~~
As the error says, config is being used in both the source and destination.
Refactor the code to avoid the extra copy and put the parsing closer to
the actual location.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* misc: genwqe: should return proper error value.
[ Upstream commit 02241995b004faa7d9ff628e97f24056190853f8 ]
The function should return -EFAULT when copy_from_user fails. Even
though the caller does not distinguish them. but we should keep backward
compatibility.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* vfio/pci: Fix potential memory leak in vfio_msi_cap_len
[ Upstream commit 30ea32ab1951c80c6113f300fce2c70cd12659e4 ]
Free allocated vdev->msi_perm in error path.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: libsas: always unregister the old device if going to discover new
[ Upstream commit 32c850bf587f993b2620b91e5af8a64a7813f504 ]
If we went into sas_rediscover_dev() the attached_sas_addr was already insured
not to be zero. So it's unnecessary to check if the attached_sas_addr is zero.
And although if the sas address is not changed, we always have to unregister
the old device when we are going to register a new one. We cannot just leave
the device there and bring up the new.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
CC: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: tegra30: fix xcvr-setup-use-fuses
[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]
There was a dot instead of a comma. Fix this.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: tegra: apalis_t30: fix mmc1 cmd pull-up
[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]
Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: smsc: fix return type of ndo_start_xmit function
[ Upstream commit 6323d57f335ce1490d025cacc83fc10b07792130 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS
[ Upstream commit a5c3021bb62b970713550db3f7fd08aa70665d7e ]
If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* EDAC: Raise the maximum number of memory controllers
[ Upstream commit 6b58859419554fb824e09cfdd73151a195473cbc ]
We observe an oops in the skx_edac module during boot:
EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
...
EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
Too many memory controllers: 16
EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0
We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).
[ bp: This is just a band-aid fix until we've sorted out the whole issue
with the bus_type association and handling in EDAC and can get rid of
this arbitrary limit. ]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Russ Anderson <russ.anderson@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
* fuse: use READ_ONCE on congestion_threshold and max_background
[ Upstream commit 2a23f2b8adbe4bd584f936f7ac17a99750eed9d7 ]
Since they are of unsigned int type, it's allowed to read them
unlocked during reporting to userspace. Let's underline this fact
with READ_ONCE() macroses.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* arm64: dts: amd: Fix SPI bus warnings
[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ]
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* Bluetooth: hci_ldisc: Fix null pointer derefence in case of early data
commit 84cb3df02aea4b00405521e67c4c67c2d525c364 upstream.
HCI_UART_PROTO_SET flag is set before hci_uart_set_proto call. If we
receive data from tty layer during this procedure, proto pointer may
not be assigned yet, leading to null pointer dereference in rx method
hci_uart_tty_receive.
This patch fixes this issue by introducing HCI_UART_PROTO_READY flag in
order to avo…
* ARM: dts: socfpga: Fix I2C bus unit-address error
[ Upstream commit cbbc488ed85061a765cf370c3e41f383c1e0add6 ]
dtc has new checks for I2C buses. Fix the warnings in unit-addresses.
arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@ffc04000/adxl345@0: I2C bus unit address format error, expected "53"
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* power: supply: ab8500_fg: silence uninitialized variable warnings
[ Upstream commit 54baff8d4e5dce2cef61953b1dc22079cda1ddb1 ]
If kstrtoul() fails then we print "charge_full" when it's uninitialized.
The debug printk doesn't add anything so I deleted it and cleaned these
two functions up a bit.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* pinctrl: at91: don't use the same irqchip with multiple gpiochips
[ Upstream commit 0c3dfa176912b5f87732545598200fb55e9c1978 ]
Sharing the same irqchip with multiple gpiochips is not a good
practice. For instance, when installing hooks, we change the state
of the irqchip. The initial state of the irqchip for the second
gpiochip to register is then disrupted.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* cxgb4: Fix endianness issue in t4_fwcache()
[ Upstream commit 0dc235afc59a226d951352b0adf4a89b532a9d13 ]
Do not put host-endian 0 or 1 into big endian feild.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* kernfs: Fix range checks in kernfs_get_target_path
[ Upstream commit a75e78f21f9ad4b810868c89dbbabcc3931591ca ]
The terminating NUL byte is only there because the buffer is
allocated with kzalloc(PAGE_SIZE, GFP_KERNEL), but since the
range-check is off-by-one, and PAGE_SIZE==PATH_MAX, the
returned string may not be zero-terminated if it is exactly
PATH_MAX characters long. Furthermore also the initial loop
may theoretically exceed PATH_MAX and cause a fault.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* power: supply: max8998-charger: Fix platform data retrieval
[ Upstream commit cb90a2c6f77fe9b43d1e3f759bb2f13fe7fa1811 ]
Since the max8998 MFD driver supports instantiation by DT, platform data
retrieval is handled in MFD probe and cell drivers should get use
the pdata field of max8998_dev struct to obtain them.
Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree")
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* s390/qeth: invoke softirqs after napi_schedule()
[ Upstream commit 4d19db777a2f32c9b76f6fd517ed8960576cb43e ]
Calling napi_schedule() from process context does not ensure that the
NET_RX softirq is run in a timely fashion. So trigger it manually.
This is no big issue with current code. A call to ndo_open() is usually
followed by a ndo_set_rx_mode() call, and for qeth this contains a
spin_unlock_bh(). Except for OSN, where qeth_l2_set_rx_mode() bails out
early.
Nevertheless it's best to not depend on this behaviour, and just fix
the issue at its source like all other drivers do. For instance see
commit 83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule").
Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* serial: mxs-auart: Fix potential infinite loop
[ Upstream commit 5963e8a3122471cadfe0eba41c4ceaeaa5c8bb4d ]
On the error path of mxs_auart_request_gpio_irq() is performed
backward iterating with index i of enum type. Underline enum type
may be unsigned char. In this case check (--i >= 0) will be always
true and error handling goes into infinite loop.
The patch changes the check so that it is valid for signed and unsigned
types.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/ACPI: Correct error message for ASPM disabling
[ Upstream commit 1ad61b612b95980a4d970c52022aa01dfc0f6068 ]
If _OSC execution fails today for platforms without an _OSC entry, code is
printing a misleading message saying disabling ASPM as follows:
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
We need to ensure that platform supports ASPM to begin with.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/iommu: Avoid derefence before pointer check
[ Upstream commit 984ecdd68de0fa1f63ce205d6c19ef5a7bc67b40 ]
The tbl pointer is being derefenced by IOMMU_PAGE_SIZE prior the check
if it is not NULL.
Just moving the dereference code to after the check, where there will
be guarantee that 'tbl' will not be NULL.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/64s/hash: Fix stab_rr off by one initialization
[ Upstream commit 09b4438db13fa83b6219aee5993711a2aa2a0c64 ]
This causes SLB alloation to start 1 beyond the start of the SLB.
There is no real problem because after it wraps it stats behaving
properly, it's just surprisig to see when looking at SLB traces.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* libfdt: Ensure INT_MAX is defined in libfdt_env.h
[ Upstream commit 53dd9dce6979bc54d64a3a09a2fb20187a025be7 ]
The next update of libfdt has a new dependency on INT_MAX. Update the
instances of libfdt_env.h in the kernel to either include the necessary
header with the definition or define it locally.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/pseries: Disable CPU hotplug across migrations
[ Upstream commit 85a88cabad57d26d826dd94ea34d3a785824d802 ]
When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.
During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.
To prevent this this patch disables CPU hotplug during the migration
process.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* power: supply: twl4030_charger: disable eoc interrupt on linear charge
[ Upstream commit 079cdff3d0a09c5da10ae1be35def7a116776328 ]
This avoids getting woken up from suspend after power interruptions
when the bci wrongly thinks the battery is full just because
of input current going low because of low input power
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* power: supply: twl4030_charger: fix charging current out-of-bounds
[ Upstream commit 8314c212f995bc0d06b54ad02ef0ab4089781540 ]
the charging current uses unsigned int variables, if we step back
if the current is still low, we would run into negative which
means setting the target to a huge value.
Better add checks here.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: toshiba: fix return type of ndo_start_xmit function
[ Upstream commit bacade822524e02f662d88f784d2ae821a5546fb ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: xilinx: fix return type of ndo_start_xmit function
[ Upstream commit 81255af8d9d5565004792c295dde49344df450ca ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: broadcom: fix return type of ndo_start_xmit function
[ Upstream commit 0c13b8d1aee87c35a2fbc1d85a1f766227cf54b5 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: chipidea: Fix otg event handler
[ Upstream commit 59739131e0ca06db7560f9073fff2fb83f6bc2a5 ]
At OTG work running time, it's possible that several events need to be
addressed (e.g. ID and VBUS events). The current implementation handles
only one event at a time which leads to ignoring the other one. Fix it.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: am335x-evm: fix number of cpsw
[ Upstream commit dcbf6b18d81bcdc51390ca1b258c17e2e13b7d0c ]
am335x-evm has only one CPSW external port physically wired, but DT defines
2 ext. ports. As result, PHY connection failure reported for the second
ext. port.
Update DT to reflect am335x-evm board HW configuration, and, while here,
switch to use phy-handle instead of phy_id.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: amd: fix return type of ndo_start_xmit function
[ Upstream commit fe72352e37ae8478f4c97975a9831f0c50f22e73 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: ux500: Correct SCU unit address
[ Upstream commit 2f217d24ecaec2012e628d21e244eef0608656a4 ]
The unit address of the Cortex-A9 SCU device node contains one zero too
many. Remove it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: ux500: Fix LCDA clock line muxing
[ Upstream commit ecde29569e3484e1d0a032bf4074449bce4d4a03 ]
The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: ste: Fix SPI controller node names
[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* cpufeature: avoid warning when compiling with clang
[ Upstream commit c785896b21dd8e156326ff660050b0074d3431df ]
The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to warnings when building the kernel with Clang:
arch/arm/crypto/aes-ce-glue.c:450:1: warning: variable
'cpu_feature_match_AES' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
module_cpu_feature_match(AES, aes_init);
^
Avoid warnings by using __maybe_unused, similar to commit 1f318a8bafcf
("modules: mark __inittest/__exittest as __maybe_unused").
Fixes: 67bad2fdb754 ("cpu: add generic support for CPU feature based module autoloading")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnx2x: Ignore bandwidth attention in single function mode
[ Upstream commit 75a110a1783ef8324ffd763b24f4ac268253cbca ]
This is a workaround for FW bug -
MFW generates bandwidth attention in single function mode, which
is only expected to be generated in multi function mode.
This undesired attention in SF mode results in incorrect HW
configuration and resulting into Tx timeout.
Signed-off-by: Shahed Shaikh <Shahed.Shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: micrel: fix return type of ndo_start_xmit function
[ Upstream commit 2b49117a5abee8478b0470cba46ac74f93b4a479 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* x86/CPU: Use correct macros for Cyrix calls
[ Upstream commit 03b099bdcdf7125d4a63dc9ddeefdd454e05123d ]
There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:
outb(CX86_CCR2, 0x22);
inb(0x23);
From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jia Zhang <qianyue.zj@alibaba-inc.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180921212041.13096-2-tedheadster@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: uvc: configfs: Drop leaked references to config items
[ Upstream commit 86f3daed59bceb4fa7981d85e89f63ebbae1d561 ]
Some of the .allow_link() and .drop_link() operations implementations
call config_group_find_item() and then leak the reference to the
returned item. Fix this by dropping those references where needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: pci: ivtv: Fix a sleep-in-atomic-context bug in ivtv_yuv_init()
[ Upstream commit 8d11eb847de7d89c2754988c944d51a4f63e219b ]
The driver may sleep in a interrupt handler.
The function call paths (from bottom to top) in Linux-4.16 are:
[FUNC] kzalloc(GFP_KERNEL)
drivers/media/pci/ivtv/ivtv-yuv.c, 938:
kzalloc in ivtv_yuv_init
drivers/media/pci/ivtv/ivtv-yuv.c, 960:
ivtv_yuv_init in ivtv_yuv_next_free
drivers/media/pci/ivtv/ivtv-yuv.c, 1126:
ivtv_yuv_next_free in ivtv_yuv_setup_stream_frame
drivers/media/pci/ivtv/ivtv-irq.c, 827:
ivtv_yuv_setup_stream_frame in ivtv_irq_dec_data_req
drivers/media/pci/ivtv/ivtv-irq.c, 1013:
ivtv_irq_dec_data_req in ivtv_irq_handler
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* MIPS: kexec: Relax memory restriction
[ Upstream commit a6da4d6fdf8bd512c98d3ac7f1d16bc4bb282919 ]
We can rely on the system kernel and the dump capture kernel themselves in
memory usage.
Being restrictive with 512MB limit may cause kexec tool failure on some
platforms.
Tested-by: Rachel Mozes <rachel.mozes@intel.com>
Reported-by: Rachel Mozes <rachel.mozes@intel.com>
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20568/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: davinci: Fix implicit enum conversion warning
[ Upstream commit 4158757395b300b6eb308fc20b96d1d231484413 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/media/platform/davinci/vpbe_display.c:524:24: warning: implicit
conversion from enumeration type 'enum osd_v_exp_ratio' to different
enumeration type 'enum osd_h_exp_ratio' [-Wenum-conversion]
layer_info->h_exp = V_EXP_6_OVER_5;
~ ^~~~~~~~~~~~~~
1 warning generated.
This appears to be a copy and paste error judging from the couple of
lines directly above this statement and the way that height is handled
in the if block above this one.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: uvc: configfs: Prevent format changes after linking header
[ Upstream commit cb2200f7af8341aaf0c6abd7ba37e4c667c41639 ]
While checks are in place to avoid attributes and children of a format
being manipulated after the format is linked into the streaming header,
the linked flag was never actually set, invalidating the protections.
Update the flag as appropriate in the header link calls.
Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: uvc: Factor out video USB request queueing
[ Upstream commit 9d1ff5dcb3cd3390b1e56f1c24ae42c72257c4a3 ]
USB requests for video data are queued from two different locations in
the driver, with the same code block occurring twice. Factor it out to a
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: uvc: Only halt video streaming endpoint in bulk mode
[ Upstream commit 8dbf9c7abefd5c1434a956d5c6b25e11183061a3 ]
When USB requests for video data fail to be submitted, the driver
signals a problem to the host by halting the video streaming endpoint.
This is only valid in bulk mode, as isochronous transfers have no
handshake phase and can't thus report a stall. The usb_ep_set_halt()
call returns an error when using isochronous endpoints, which we happily
ignore, but some UDCs complain in the kernel log. Fix this by only
trying to halt the endpoint in bulk mode.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* misc: kgdbts: Fix restrict error
[ Upstream commit fa0218ef733e6f247a1a3986e3eb12460064ac77 ]
kgdbts current fails when compiled with restrict:
drivers/misc/kgdbts.c: In function ‘configure_kgdbts’:
drivers/misc/kgdbts.c:1070:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict]
strcpy(config, opt);
^~~~~~~~~~~~~~~~~~~
As the error says, config is being used in both the source and destination.
Refactor the code to avoid the extra copy and put the parsing closer to
the actual location.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* misc: genwqe: should return proper error value.
[ Upstream commit 02241995b004faa7d9ff628e97f24056190853f8 ]
The function should return -EFAULT when copy_from_user fails. Even
though the caller does not distinguish them. but we should keep backward
compatibility.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* vfio/pci: Fix potential memory leak in vfio_msi_cap_len
[ Upstream commit 30ea32ab1951c80c6113f300fce2c70cd12659e4 ]
Free allocated vdev->msi_perm in error path.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: libsas: always unregister the old device if going to discover new
[ Upstream commit 32c850bf587f993b2620b91e5af8a64a7813f504 ]
If we went into sas_rediscover_dev() the attached_sas_addr was already insured
not to be zero. So it's unnecessary to check if the attached_sas_addr is zero.
And although if the sas address is not changed, we always have to unregister
the old device when we are going to register a new one. We cannot just leave
the device there and bring up the new.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
CC: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: dts: tegra30: fix xcvr-setup-use-fuses
[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]
There was a dot instead of a comma. Fix this.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ARM: tegra: apalis_t30: fix mmc1 cmd pull-up
[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]
Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: smsc: fix return type of ndo_start_xmit function
[ Upstream commit 6323d57f335ce1490d025cacc83fc10b07792130 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS
[ Upstream commit a5c3021bb62b970713550db3f7fd08aa70665d7e ]
If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* EDAC: Raise the maximum number of memory controllers
[ Upstream commit 6b58859419554fb824e09cfdd73151a195473cbc ]
We observe an oops in the skx_edac module during boot:
EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
...
EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
Too many memory controllers: 16
EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0
We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).
[ bp: This is just a band-aid fix until we've sorted out the whole issue
with the bus_type association and handling in EDAC and can get rid of
this arbitrary limit. ]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Russ Anderson <russ.anderson@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
* fuse: use READ_ONCE on congestion_threshold and max_background
[ Upstream commit 2a23f2b8adbe4bd584f936f7ac17a99750eed9d7 ]
Since they are of unsigned int type, it's allowed to read them
unlocked during reporting to userspace. Let's underline this fact
with READ_ONCE() macroses.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* arm64: dts: amd: Fix SPI bus warnings
[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ]
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* Bluetooth: hci_ldisc: Fix null pointer derefence in case of early data
commit 84cb3df02aea4b00405521e67c4c67c2d525c364 upstream.
HCI_UART_PROTO_SET flag is set before hci_uart_set_proto call. If we
receive data from tty layer during this procedure, proto pointer may
not be assigned yet, leading to null pointer dereference in rx method
hci_uart_tty_receive.
This patch fixes this issue by introducing HCI_UART_PROTO_READY flag in
order to avoid any proto operation before proto opening and assignment.
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Ralph Siemsen <ralph.siemsen@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: hci_ldisc: Postpone HCI_UART_PROTO_READY bit set in hci_uart_set_proto()
commit 56897b217a1d0a91c9920cb418d6b3fe922f590a upstream.
task A: task B:
hci_uart_set_proto flush_to_ldisc
- p->open(hu) -> h5_open //alloc h5 - receive_buf
- set_bit HCI_UART_PROTO_READY - tty_port_default_receive_buf
- hci_uart_register_dev - tty_ldisc_receive_buf
- hci_uart_tty_receive
- test_bit HCI_UART_PROTO_READY
- h5_recv
- clear_bit HCI_UART_PROTO_READY while() {
- p->open(hu) -> h5_close //free h5
- h5_rx_3wire_hdr
- h5_reset() //use-after-free
}
It could use ioctl to set hci uart proto, but there is
a use-after-free issue when hci_uart_register_dev() fail in
hci_uart_set_proto(), see stack above, fix this by setting
HCI_UART_PROTO_READY bit only when hci_uart_register_dev()
return success.
Reported-by: syzbot+899a33dc0fa0dbaf06a6@syzkaller.appspotmail.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Ralph Siemsen <ralph.siemsen@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* memfd: Use radix_tree_deref_slot_protected to avoid the warning.
The commit eb4058d8daf8 ("memfd: Fix locking when tagging pins")
introduces the following warning messages.
*WARNING: suspicious RCU usage in memfd_wait_for_pins*
It is because we still use radix_tree_deref_slot without read_rcu_lock.
We should use radix_tree_deref_slot_protected instead in the case.
Cc: stable@vger.kernel.org
Fixes: eb4058d8daf8 ("memfd: Fix locking when tagging pins")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/atomic: Fix smp_mb__{before,after}_atomic()
commit 69d927bba39517d0980462efc051875b7f4db185 upstream.
Recent probing at the Linux Kernel Memory Model uncovered a
'surprise'. Strongly ordered architectures where the atomic RmW
primitive implies full memory ordering and
smp_mb__{before,after}_atomic() are a simple barrier() (such as x86)
fail for:
*x = 1;
atomic_inc(u);
smp_mb__after_atomic();
r0 = *y;
Because, while the atomic_inc() implies memory order, it
(surprisingly) does not provide a compiler barrier. This then allows
the compiler to re-order like so:
atomic_inc(u);
*x = 1;
smp_mb__after_atomic();
r0 = *y;
Which the CPU is then allowed to re-order (under TSO rules) like:
atomic_inc(u);
r0 = *y;
*x = 1;
And this very much was not intended. Therefore strengthen the atomic
RmW ops to include a compiler barrier.
NOTE: atomic_{or,and,xor} and the bitops already had the compiler
barrier.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jari Ruusu <jari.ruusu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* slcan: Fix memory leak in error path
commit ed50e1600b4483c049ce76e6bd3b665a6a9300ed upstream.
This patch is fixing memory leak reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096):
comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s)
hex dump (first 32 bytes):
73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000a06eec0d>] __kmalloc+0x18b/0x2c0
[<0000000083306e66>] kvmalloc_node+0x3a/0xc0
[<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080
[<0000000061a996c9>] slcan_open+0x3ae/0x9a0
[<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0
[<0000000019289631>] tty_set_ldisc+0x28c/0x5f0
[<000000004de5a617>] tty_ioctl+0x48d/0x1590
[<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510
[<0000000059068dbc>] ksys_ioctl+0x99/0xb0
[<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0
[<0000000053d0332e>] do_syscall_64+0x16f/0x580
[<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<000000008ea75434>] 0xffffffffffffffff
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: cdc_ncm: Signedness bug in cdc_ncm_set_dgram_size()
commit a56dcc6b455830776899ce3686735f1172e12243 upstream.
This code is supposed to test for negative error codes and partial
reads, but because sizeof() is size_t (unsigned) type then negative
error codes are type promoted to high positive values and the condition
doesn't work as expected.
Fixes: 332f989a3b00 ("CDC-NCM: handle incomplete transfer of MTU")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* apparmor: fix uninitialized lsm_audit member
commit b6b1b81b3afba922505b57f4c812bba022f7c4a9 upstream.
BugLink: http://bugs.launchpad.net/bugs/1268727
The task field in the lsm_audit struct needs to be initialized if
a change_hat fails, otherwise the following oops will occur
BUG: unable to handle kernel paging request at 0000002fbead7d08
IP: [<ffffffff8171153e>] _raw_spin_lock+0xe/0x50
PGD 1e3f35067 PUD 0
Oops: 0002 [#1] SMP
Modules linked in: pppox crc_ccitt p8023 p8022 psnap llc ax25 btrfs raid6_pq xor xfs libcrc32c dm_multipath scsi_dh kvm_amd dcdbas kvm microcode amd64_edac_mod joydev edac_core psmouse edac_mce_amd serio_raw k10temp sp5100_tco i2c_piix4 ipmi_si ipmi_msghandler acpi_power_meter mac_hid lp parport hid_generic usbhid hid pata_acpi mpt2sas ahci raid_class pata_atiixp bnx2 libahci scsi_transport_sas [last unloaded: tipc]
CPU: 2 PID: 699 Comm: changehat_twice Tainted: GF O 3.13.0-7-generic #25-Ubuntu
Hardware name: Dell Inc. PowerEdge R415/08WNM9, BIOS 1.8.6 12/06/2011
task: ffff8802135c6000 ti: ffff880212986000 task.ti: ffff880212986000
RIP: 0010:[<ffffffff8171153e>] [<ffffffff8171153e>] _raw_spin_lock+0xe/0x50
RSP: 0018:ffff880212987b68 EFLAGS: 00010006
RAX: 0000000000020000 RBX: 0000002fbead7500 RCX: 0000000000000000
RDX: 0000000000000292 RSI: ffff880212987ba8 RDI: 0000002fbead7d08
RBP: ffff880212987b68 R08: 0000000000000246 R09: ffff880216e572a0
R10: ffffffff815fd677 R11: ffffea0008469580 R12: ffffffff8130966f
R13: ffff880212987ba8 R14: 0000002fbead7d08 R15: ffff8800d8c6b830
FS: 00002b5e6c84e7c0(0000) GS:ffff880216e40000(0000) knlGS:0000000055731700
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000002fbead7d08 CR3: 000000021270f000 CR4: 00000000000006e0
Stack:
ffff880212987b98 ffffffff81075f17 ffffffff8130966f 0000000000000009
0000000000000000 0000000000000000 ffff880212987bd0 ffffffff81075f7c
0000000000000292 ffff880212987c08 ffff8800d8c6b800 0000000000000026
Call Trace:
[<ffffffff81075f17>] __lock_task_sighand+0x47/0x80
[<ffffffff8130966f>] ? apparmor_cred_prepare+0x2f/0x50
[<ffffffff81075f7c>] do_send_sig_info+0x2c/0x80
[<ffffffff81075fee>] send_sig_info+0x1e/0x30
[<ffffffff8130242d>] aa_audit+0x13d/0x190
[<ffffffff8130c1dc>] aa_audit_file+0xbc/0x130
[<ffffffff8130966f>] ? apparmor_cred_prepare+0x2f/0x50
[<ffffffff81304cc2>] aa_change_hat+0x202/0x530
[<ffffffff81308fc6>] aa_setprocattr_changehat+0x116/0x1d0
[<ffffffff8130a11d>] apparmor_setprocattr+0x25d/0x300
[<ffffffff812cee56>] security_setprocattr+0x16/0x20
[<ffffffff8121fc87>] proc_pid_attr_write+0x107/0x130
[<ffffffff811b7604>] vfs_write+0xb4/0x1f0
[<ffffffff811b8039>] SyS_write+0x49/0xa0
[<ffffffff8171a1bf>] tracesys+0xe1/0xe6
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* apparmor: fix update the mtime of the profile file on replacement
commit d671e890205a663429da74e1972e652bea4d73ab upstream.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* apparmor: fix module parameters can be changed after policy is locked
commit 58acf9d911c8831156634a44d0b022d683e1e50c upstream.
the policy_lock parameter is a one way switch that prevents policy
from being further modified. Unfortunately some of the module parameters
can effectively modify policy by turning off enforcement.
split policy_admin_capable into a view check and a full admin check,
and update the admin check to test the policy_lock parameter.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* kprobes/x86: Prohibit probing on exception masking instructions
commit ee6a7354a3629f9b65bc18dbe393503e9440d6f5 upstream.
Since MOV SS and POP SS instructions will delay the exceptions until the
next instruction is executed, single-stepping on it by kprobes must be
prohibited.
However, kprobes usually executes those instructions directly on trampoline
buffer (a.k.a. kprobe-booster), except for the kprobes which has
post_handler. Thus if kprobe user probes MOV SS with post_handler, it will
do single-stepping on the MOV SS.
This means it is safe that if it is used via ftrace or perf/bpf since those
don't use the post_handler.
Anyway, since the stack switching is a rare case, it is safer just
rejecting kprobes on such instructions.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "David S . Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/152587069574.17316.3311695234863248641.stgit@devbox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uprobes/x86: Prohibit probing on MOV SS instruction
commit 13ebe18c94f5b0665c01ae7fad2717ae959f4212 upstream.
Since MOV SS and POP SS instructions will delay the exceptions until the
next instruction is executed, single-stepping on it by uprobes must be
prohibited.
uprobe already rejects probing on POP SS (0x1f), but allows probing on MOV
SS (0x8e and reg == 2). This checks the target instruction and if it is
MOV SS or POP SS, returns -ENOTSUPP to reject probing.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "David S . Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/152587072544.17316.5950935243917346341.stgit@devbox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fbdev: Remove unused SH-Mobile HDMI driver
commit 34280340b1dc74c521e636f45cd728f9abf56ee2 upstream.
As of commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code
for R-Mobile A1"), the SH-Mobile HDMI driver is no longer used.
In theory it could still be used on R-Mobile A1 SoCs, but that requires
adding DT support to the driver, which is not planned.
Remove the driver, it can be resurrected from git history when needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* block: introduce blk_rq_is_passthrough
commit 57292b58ddb58689e8c3b4c6eadbef10d9ca44dd upstream.
This can be used to check for fs vs non-fs requests and basically
removes all knowledge of BLOCK_PC specific from the block layer,
as well as preparing for removing the cmd_type field in struct request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
[only take the blkdev.h changes as we only want the function for backported
patches - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fbdev: Ditch fb_edid_add_monspecs
commit 3b8720e63f4a1fc6f422a49ecbaa3b59c86d5aaf upstream.
It's dead code ever since
commit 34280340b1dc74c521e636f45cd728f9abf56ee2
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Fri Dec 4 17:01:43 2015 +0100
fbdev: Remove unused SH-Mobile HDMI driver
Also with this gone we can remove the cea_modes db. This entire thing
is massively incomplete anyway, compared to the CEA parsing that
drm_edid.c does.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tavis Ormandy <taviso@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721201956.941-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* libata: have ata_scsi_rw_xlat() fail invalid passthrough requests
commit 2d7271501720038381d45fb3dcbe4831228fc8cc upstream.
For passthrough requests, libata-scsi takes what the user passes in
as gospel. This can be problematic if the user fills in the CDB
incorrectly. One example of that is in request sizes. For read/write
commands, the CDB contains fields describing the transfer length of
the request. These should match with the SG_IO header fields, but
libata-scsi currently does no validation of that.
Check that the number of blocks in the CDB for passthrough requests
matches what was mapped into the request. If the CDB asks for more
data then the validated SG_IO header fields, error it.
Reported-by: Krishna Ram Prakash R <krp@gtux.in>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* f2fs: return correct errno in f2fs_gc
[ Upstream commit 61f7725aa148ee870436a29d3a24d5c00ab7e9af ]
This fixes overriding error number in f2fs_gc.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: ovs: fix return type of ndo_start_xmit function
[ Upstream commit eddf11e18dff0e8671e06ce54e64cfc843303ab9 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ath10k: fix vdev-start timeout on error
[ Upstream commit 833fd34d743c728afe6d127ef7bee67e7d9199a8 ]
The vdev-start-response message should cause the
completion to fire, even in the error case. Otherwise,
the user still gets no useful information and everything
is blocked until the timeout period.
Add some warning text to print out the invalid status
code to aid debugging, and propagate failure code.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* SUNRPC: Fix priority queue fairness
[ Upstream commit f42f7c283078ce3c1e8368b140e270755b1ae313 ]
Fix up the priority queue to not batch by owner, but by queue, so that
we allow '1 << priority' elements to be dequeued before switching to
the next priority queue.
The owner field is still used to wake up requests in round robin order
by owner to avoid single processes hogging the RPC layer by loading the
queues.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ath9k: fix reporting calculated new FFT upper max
[ Upstream commit 4fb5837ac2bd46a85620b297002c704e9958f64d ]
Since the debug print code is outside of the loop, it shouldn't use the loop
iterator anymore but instead print the found maximum index.
Cc: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in fotg210_get_status()
[ Upstream commit 2337a77c1cc86bc4e504ecf3799f947659c86026 ]
The driver may sleep in an interrupt handler.
The function call path (from bottom to top) in Linux-4.17 is:
[FUNC] fotg210_ep_queue(GFP_KERNEL)
drivers/usb/gadget/udc/fotg210-udc.c, 744:
fotg210_ep_queue in fotg210_get_status
drivers/usb/gadget/udc/fotg210-udc.c, 768:
fotg210_get_status in fotg210_setup_packet
drivers/usb/gadget/udc/fotg210-udc.c, 949:
fotg210_setup_packet in fotg210_irq (interrupt handler)
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
If possible, spin_unlock() and spin_lock() around fotg210_ep_queue()
can be also removed.
This bug is found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
[ Upstream commit 9524d6b265f9b2b9a61fceb2ee2ce1c2a83e39ca ]
Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.
In file included from drivers/dma/ep93xx_dma.c:30:
./include/linux/platform_data/dma-ep93xx.h:88:10: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
return DMA_NONE;
~~~~~~ ^~~~~~~~
1 warning generated.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* nl80211: Fix a GET_KEY reply attribute
[ Upstream commit efdfce7270de85a8706d1ea051bef3a7486809ff ]
Use the NL80211_KEY_IDX attribute inside the NL80211_ATTR_KEY in
NL80211_CMD_GET_KEY responses to comply with nl80211_key_policy.
This is unlikely to affect existing userspace.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* dmaengine: timb_dma: Use proper enum in td_prep_slave_sg
[ Upstream commit 5e621f5d538985f010035c6f3e28c22829d36db1 ]
Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.
drivers/dma/timb_dma.c:548:27: warning: implicit conversion from
enumeration type 'enum dma_transfer_direction' to different enumeration
type 'enum dma_data_direction' [-Wenum-conversion]
td_desc->desc_list_len, DMA_MEM_TO_DEV);
^~~~~~~~~~~~~~
1 warning generated.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* mei: samples: fix a signedness bug in amt_host_if_call()
[ Upstream commit 185647813cac080453cb73a2e034a8821049f2a7 ]
"out_buf_sz" needs to be signed for the error handling to work.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* cxgb4: Use proper enum in IEEE_FAUX_SYNC
[ Upstream commit 258b6d141878530ba1f8fc44db683822389de914 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:390:4: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
IEEE_FAUX_SYNC(dev, dcb);
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h:70:10: note: expanded
from macro 'IEEE_FAUX_SYNC'
CXGB4_DCB_STATE_FW_ALLSYNCED);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.
CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* cxgb4: Use proper enum in cxgb4_dcb_handle_fw_update
[ Upstream commit 3b0b8f0d9a259f6a428af63e7a77547325f8e081 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:303:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
? CXGB4_DCB_STATE_FW_ALLSYNCED
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:304:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
: CXGB4_DCB_STATE_FW_INCOMPLETE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.
CXGB4_DCB_STATE_FW_INCOMPLETE = CXGB4_DCB_INPUT_FW_INCOMPLETE = 2
CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/pseries: Fix DTL buffer registration
[ Upstream commit db787af1b8a6b4be428ee2ea7d409dafcaa4a43c ]
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:
dtl_start: DTL registration for cpu 0 (hw 0) failed with -4
Fix this in the obvious manner.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/pseries: Fix how we iterate over the DTL entries
[ Upstream commit 9258227e9dd1da8feddb07ad9702845546a581c9 ]
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* mtd: rawnand: sh_flctl: Use proper enum for flctl_dma_fifo0_transfer
[ Upstream commit e2bfa4ca23d9b5a7bdfcf21319fad9b59e38a05c ]
Clang warns when one enumerated type is converted implicitly to another:
drivers/mtd/nand/raw/sh_flctl.c:483:46: warning: implicit conversion
from enumeration type 'enum dma_transfer_direction' to different
enumeration type 'enum dma_data_direction' [-Wenum-conversion]
flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
drivers/mtd/nand/raw/sh_flctl.c:542:46: warning: implicit conversion
from enumeration type 'enum dma_transfer_direction' to different
enumeration type 'enum dma_data_direction' [-Wenum-conversion]
flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
2 warnings generated.
Use the proper enums from dma_data_direction to satisfy Clang.
DMA_MEM_TO_DEV = DMA_TO_DEVICE = 1
DMA_DEV_TO_MEM = DMA_FROM_DEVICE = 2
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ixgbe: Fix crash with VFs and flow director on interface flap
[ Upstream commit 5d826d209164b0752c883607be4cdbbcf7cab494 ]
This patch fix crash when we have restore flow director filters after reset
adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the
rx_ring array, as it has a VF identifier in the upper 32 bits.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* IB/mthca: Fix error return code in __mthca_init_one()
[ Upstream commit 39f2495618c5e980d2873ea3f2d1877dd253e07a ]
Fix to return a negative error code from the mthca_cmd_init() error
handling case instead of 0, as done elsewhere in this function.
Fixes: 80fd8238734c ("[PATCH] IB/mthca: Encapsulate command interface init")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ata: ep93xx: Use proper enums for directions
[ Upstream commit 6adde4a36f1b6a562a1057fbb1065007851050e7 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/ata/pata_ep93xx.c:662:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:670:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
~ ^~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:681:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
conf.direction = DMA_FROM_DEVICE;
~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:692:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
conf.direction = DMA_TO_DEVICE;
~ ^~~~~~~~~~~~~
Use the equivalent valued enums from the expected type so that Clang no
longer warns about a conversion.
DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: hda/sigmatel - Disable automute for Elo VuPoint
[ Upstream commit d153135e93a50cdb6f1b52e238909e9965b56056 ]
The Elo VuPoint 15MX has two headphone jacks of which neither work by
default. Disabling automute allows ALSA to work normally with the
speakers & left headphone jack.
Future pin configuration changes may be required in the future to get
the right headphone jack working in tandem.
Signed-off-by: Michael Pobega <mpobega@neverware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* KVM: PPC: Book3S PR: Exiting split hack mode needs to fixup both PC and LR
[ Upstream commit 1006284c5e411872333967b1970c2ca46a9e225f ]
When an OS (currently only classic Mac OS) is running in KVM-PR and makes a
linked jump from code with split hack addressing enabled into code that does
not, LR is not correctly updated and reflects the previously munged PC.
To fix this, this patch undoes the address munge when exiting split
hack mode so that code relying on LR being a proper address will now
execute. This does not affect OS X or other operating systems running
on KVM-PR.
Signed-off-by: Cameron Kaiser <spectre@floodgap.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: serial: cypress_m8: fix interrupt-out transfer length
[ Upstream commit 56445eef55cb5904096fed7a73cf87b755dfffc7 ]
Fix interrupt-out transfer length which was being set to the
transfer-buffer length rather than the size of the outgoing packet.
Note that no slab data was leaked as the whole transfer buffer is always
cleared before each transfer.
Fixes: 9aa8dae7b1fa ("cypress_m8: use usb_fill_int_urb where appropriate")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* mtd: physmap_of: Release resources on error
[ Upstream commit ef0de747f7ad179c7698a5b0e28db05f18ecbf57 ]
During probe, if there was an error the memory region and the memory
map were not properly released.This can lead a system unusable if
deferred probe is in use.
Replace mem_request and map with devm_ioremap_resource
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* brcmfmac: fix full timeout waiting for action frame on-channel tx
[ Upstream commit fbf07000960d9c8a13fdc17c6de0230d681c7543 ]
The driver sends an action frame down and waits for a completion signal
triggered by the received BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE event
to continue the process. However, the action frame could be transmitted
either on the current channel or on an off channel. For the on-channel
case, only BRCMF_E_ACTION_FRAME_COMPLETE event will be received when
the frame is transmitted, which make the driver always wait a full
timeout duration. This patch has the completion signal be triggered by
receiving the BRCMF_E_ACTION_FRAME_COMPLETE event for the on-channel
case.
This change fixes WFA p2p certification 5.1.19 failure.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* NFSv4.x: fix lock recovery during delegation recall
[ Upstream commit 44f411c353bf6d98d5a34f8f1b8605d43b2e50b8 ]
Running "./nfstest_delegation --runtest recall26" uncovers that
client doesn't recover the lock when we have an appending open,
where the initial open got a write delegation.
Instead of checking for the passed in open context against
the file lock's open context. Check that the state is the same.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* dmaengine: ioat: fix prototype of ioat_enumerate_channels
[ Upstream commit f4d34aa8c887a8a2d23ef546da0efa10e3f77241 ]
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* Input: st1232 - set INPUT_PROP_DIRECT property
[ Upstream commit 20bbb312079494a406c10c90932e3c80837c9d94 ]
This is how userspace checks for touchscreen devices most reliably.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* crypto: mxs-dcp - Fix SHA null hashes and output length
[ Upstream commit c709eebaf5c5faa8a0f140355f9cfe67e8f7afb1 ]
DCP writes at least 32 bytes in the output buffer instead of hash length
as documented. Add intermediate buffer to prevent write out of bounds.
When requested to produce null hashes DCP fails to produce valid output.
Add software workaround to bypass hardware and return valid output.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* x86/olpc: Fix build error with CONFIG_MFD_CS5535=m
[ Upstream commit fa112cf1e8bc693d5a666b1c479a2859c8b6e0f1 ]
When building a 32-bit config which has the above MFD item as module
but OLPC_XO1_PM is enabled =y - which is bool, btw - the kernel fails
building with:
ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_remove':
/home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:159: undefined reference to `mfd_cell_disable'
ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function…
The purpose of Anxiety is to improve throughput on latency-sensitive tasks on embedded flash storage devices. On modern devices, embedded systems contain relatively fast storage, so spending too much time with complicated queue-shifting scheduling algorithms may end up bottlenecking the device. Similarly to the No-op I/O scheduler, Anxiety works with a FIFO queue; however, Anxiety includes basic request logic based on READ v. WRITE requests. WRITE requests are starved at a fixed ratio, defined as the `max_writes_starved` tunable. READ requests are given priority over WRITE requests due to their essentiality in determining load-time latency. ------------------TEST-------------------- SCHEDULERS Anxiety CFQ S. READ 286.22 280.74 S. WRITE 221.01 174.0 R. READ 41.35 47.89 R. WRITE 10.65 10.7 SQL INS. 1276.57 1121.25 SQL UPD. 2920.97 2978.74 SQL DEL. 2503.16 2642.3 ------------------------------------------ Tests were done using AndroBench on a Xiaomi Mi A2 on the latest 4.4.178 patch. This application has been known to be misrepresentative on I/O scores in the past. Signed-off-by: Tyler Nijmeh <tylernij@gmail.com>
Some requests would like to be treated as a synchronous request. In this case, we can allow these special requests to be part of the READ FIFO list. They are treated as READ requests, inheriting their request biases. Also, READ requests are always treated as sync. Signed-off-by: Tyler Nijmeh <tylernij@gmail.com>
This results in far faster application start speeds. Signed-off-by: Tyler Nijmeh <tylernij@gmail.com>
Based on ideas of FranciscoFranco's non-generic driver. Sysfs node: /sys/class/misc/boeffla_wakelock_blocker/wakelock_blocker - list of wakelocks to be blocked, separated by semicolons /sys/class/misc/boeffla_wakelock_blocker/debug - write: 0/1 to switch off and on debug logging into dmesg - read: get current driver internals /sys/class/misc/boeffla_wakelock_blocker/version - show driver version Signed-off-by: andip71 <andreasp@gmx.de> Conflicts: kernel/power/Kconfig
- currently active wakelocks on the list are forcefully killed
There are now two lists:
- the previously existing list of user defined wakelocks to block
- a new list called "wakelock_blocker_default" which comes prepopulated with the most common
and safe wakelocks to block:
qcom_rx_wakelock;wlan;wlan_wow_wl;wlan_extscan_wl;netmgr_wl;NETLINK
A combination of both wakelock lists will be blocked finally.
sensor_ind;[timerfd]
Signed-off-by: Francisco Franco <franciscofranco.1990@gmail.com> Signed-off-by: Mihran Thalhath <mihranz7@gmail.com> Conflicts: drivers/base/power/boeffla_wl_blocker.h
Signed-off-by: Francisco Franco <franciscofranco.1990@gmail.com> Conflicts: drivers/base/power/boeffla_wl_blocker.h
Signed-off-by: rad <theradcolor@gmail.com>
sysfs groups should only be readable and writable, not executable Signed-off-by: Francisco Franco <franciscofranco.1990@gmail.com> [@0ctobot: Fix invalid permissions] Signed-off-by: Adam W. Willis <return.of.octobot@gmail.com>
Signed-off-by: Akhil Narang <akhilnarang.1999@gmail.com> Conflicts: scripts/Kbuild.include
…iling open Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Akhil Narang <akhilnarang.1999@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Akhil Narang <akhilnarang.1999@gmail.com>
If infra fails, this will make sure we don't block people's builds. Suggested-by: Francisco Franco <franciscofranco.1990@gmail.com> Signed-off-by: Akhil Narang <akhilnarang.1999@gmail.com>
Squashed with "block: maple: Convert to State Notifier" Signed-off-by: Joe Maples <joe@frap129.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Akhil Narang <akhilnarang.1999@gmail.com>
Used checkpatch.pl; the 80 line length warnings were left alone. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Akhil Narang <akhilnarang.1999@gmail.com>
credits to @GUYVER91
The use of symbolic permissions is deprecated and discouraged Change-Id: I440ba7ca32eae85f07795c2ec8177259e9faa9c7 Signed-off-by: Harsh Shandilya <harsh@prjkt.io>
[@nathanchance: Fix checkpatch.pl warnings] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Change-Id: Iad4128b72ccecd36b0aae0d51075018a47c2affb
Signed-off-by: flar2 <asegaert@gmail.com>
credits to @robcore Signed-off-by: ktommy91 <kemenesi.tamas@gmail.com>
Ashmem uses a single big mutex lock for all synchronization, and even uses it when no synchronization issues are present. The contention from using a single lock results in all-around poor performance. Use fine-grained locks and atomic constructions to eliminate the big mutex lock, thereby improving performance greatly. Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: rad <theradcolor@gmail.com>
radcolor
pushed a commit
that referenced
this pull request
Dec 9, 2019
As Jiqun Li reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202883 sometimes, dead lock when make system call SYS_getdents64 with fsync() is called by another process. monkey running on android9.0 1. task 9785 held sbi->cp_rwsem and waiting lock_page() 2. task 10349 held mm_sem and waiting sbi->cp_rwsem 3. task 9709 held lock_page() and waiting mm_sem so this is a dead lock scenario. task stack is show by crash tools as following crash_arm64> bt ffffffc03c354080 PID: 9785 TASK: ffffffc03c354080 CPU: 1 COMMAND: "RxIoScheduler-3" >> #7 [ffffffc01b50fac0] __lock_page at ffffff80081b11e8 crash-arm64> bt 10349 PID: 10349 TASK: ffffffc018b83080 CPU: 1 COMMAND: "BUGLY_ASYNC_UPL" >> #3 [ffffffc01f8cfa40] rwsem_down_read_failed at ffffff8008a93afc PC: 00000033 LR: 00000000 SP: 00000000 PSTATE: ffffffffffffffff crash-arm64> bt 9709 PID: 9709 TASK: ffffffc03e7f3080 CPU: 1 COMMAND: "IntentService[A" >> #3 [ffffffc001e67850] rwsem_down_read_failed at ffffff8008a93afc >> #8 [ffffffc001e67b80] el1_ia at ffffff8008084fc4 PC: ffffff8008274114 [compat_filldir64+120] LR: ffffff80083584d4 [f2fs_fill_dentries+448] SP: ffffffc001e67b80 PSTATE: 80400145 X29: ffffffc001e67b80 X28: 0000000000000000 X27: 000000000000001a X26: 00000000000093d7 X25: ffffffc070d52480 X24: 0000000000000008 X23: 0000000000000028 X22: 00000000d43dfd60 X21: ffffffc001e67e90 X20: 0000000000000011 X19: ffffff80093a4000 X18: 0000000000000000 X17: 0000000000000000 X16: 0000000000000000 X15: 0000000000000000 X14: ffffffffffffffff X13: 0000000000000008 X12: 0101010101010101 X11: 7f7f7f7f7f7f7f7f X10: 6a6a6a6a6a6a6a6a X9: 7f7f7f7f7f7f7f7f X8: 0000000080808000 X7: ffffff800827409c X6: 0000000080808000 X5: 0000000000000008 X4: 00000000000093d7 X3: 000000000000001a X2: 0000000000000011 X1: ffffffc070d52480 X0: 0000000000800238 >> #9 [ffffffc001e67be0] f2fs_fill_dentries at ffffff80083584d0 PC: 0000003c LR: 00000000 SP: 00000000 PSTATE: 000000d9 X12: f48a02ff X11: d4678960 X10: d43dfc00 X9: d4678ae4 X8: 00000058 X7: d4678994 X6: d43de800 X5: 000000d9 X4: d43dfc0c X3: d43dfc10 X2: d46799c8 X1: 00000000 X0: 00001068 Below potential deadlock will happen between three threads: Thread A Thread B Thread C - f2fs_do_sync_file - f2fs_write_checkpoint - down_write(&sbi->node_change) -- 1) - do_page_fault - down_write(&mm->mmap_sem) -- 2) - do_wp_page - f2fs_vm_page_mkwrite - getdents64 - f2fs_read_inline_dir - lock_page -- 3) - f2fs_sync_node_pages - lock_page -- 3) - __do_map_lock - down_read(&sbi->node_change) -- 1) - f2fs_fill_dentries - dir_emit - compat_filldir64 - do_page_fault - down_read(&mm->mmap_sem) -- 2) Since f2fs_readdir is protected by inode.i_rwsem, there should not be any updates in inode page, we're safe to lookup dents in inode page without its lock held, so taking off the lock to improve concurrency of readdir and avoid potential deadlock. Reported-by: Jiqun Li <jiqun.li@unisoc.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Dec 19, 2019
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
radcolor
pushed a commit
that referenced
this pull request
Dec 20, 2019
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
radcolor
pushed a commit
that referenced
this pull request
Jan 9, 2020
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
radcolor
pushed a commit
that referenced
this pull request
Feb 15, 2020
[ Upstream commit 42ffb0bf584ae5b6b38f72259af1e0ee417ac77f ] There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02 ("Btrfs: Add writepages support") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Apr 24, 2020
commit 1f80bd6a6cc8358b81194e1f5fc16449947396ec upstream. The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B), contradicts other flows such as ipoib_open possibly causing a deadlock. To prevent this deadlock heavy flush is called with RTNL locked and only then tries to acquire vlan_rwsem. This deadlock is possible only when there are child interfaces. [ 140.941758] ====================================================== [ 140.946276] WARNING: possible circular locking dependency detected [ 140.950950] 4.15.0-rc1+ #9 Tainted: G O [ 140.954797] ------------------------------------------------------ [ 140.959424] kworker/u32:1/146 is trying to acquire lock: [ 140.963450] (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 140.970006] but task is already holding lock: [ 140.975141] (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib] [ 140.982105] which lock already depends on the new lock. [ 140.990023] the existing dependency chain (in reverse order) is: [ 140.998650] -> #1 (&priv->vlan_rwsem){++++}: [ 141.005276] down_read+0x4d/0xb0 [ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib] [ 141.014400] __dev_open+0xcb/0x140 [ 141.017919] __dev_change_flags+0x1a4/0x1e0 [ 141.022133] dev_change_flags+0x23/0x60 [ 141.025695] devinet_ioctl+0x704/0x7d0 [ 141.029156] sock_do_ioctl+0x20/0x50 [ 141.032526] sock_ioctl+0x221/0x300 [ 141.036079] do_vfs_ioctl+0xa6/0x6d0 [ 141.039656] SyS_ioctl+0x74/0x80 [ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96 [ 141.046891] -> #0 (rtnl_mutex){+.+.}: [ 141.051701] lock_acquire+0xd4/0x220 [ 141.055212] __mutex_lock+0x88/0x970 [ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib] [ 141.067648] process_one_work+0x1f5/0x610 [ 141.071429] worker_thread+0x4a/0x3f0 [ 141.074890] kthread+0x141/0x180 [ 141.078085] ret_from_fork+0x24/0x30 [ 141.081559] other info that might help us debug this: [ 141.088967] Possible unsafe locking scenario: [ 141.094280] CPU0 CPU1 [ 141.097953] ---- ---- [ 141.101640] lock(&priv->vlan_rwsem); [ 141.104771] lock(rtnl_mutex); [ 141.109207] lock(&priv->vlan_rwsem); [ 141.114032] lock(rtnl_mutex); [ 141.116800] *** DEADLOCK *** Fixes: b4b678b06f6e ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
radcolor
pushed a commit
that referenced
this pull request
Jul 11, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Jul 11, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Jul 11, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Jul 11, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Jul 12, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Jul 29, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Aug 3, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Aug 5, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Aug 21, 2020
[ Upstream commit e24c6447ccb7b1a01f9bf0aec94939e6450c0b4d ]
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
fakeyatogod
pushed a commit
that referenced
this pull request
Sep 23, 2020
[ Upstream commit d26383dcb2b4b8629fde05270b4e3633be9e3d4b ]
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: cff7f95 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Nov 28, 2020
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Oktapra Amtono <oktapra.amtono@gmail.com>
radcolor
pushed a commit
that referenced
this pull request
Nov 30, 2020
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Oktapra Amtono <oktapra.amtono@gmail.com>
radcolor
pushed a commit
that referenced
this pull request
Dec 3, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Dec 3, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Dec 3, 2020
This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Dec 6, 2020
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Oktapra Amtono <oktapra.amtono@gmail.com>
radcolor
pushed a commit
that referenced
this pull request
Dec 14, 2020
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Oktapra Amtono <oktapra.amtono@gmail.com>
radcolor
pushed a commit
that referenced
this pull request
Dec 14, 2020
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd062a ("rtnetlink: Remove VLA usage") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Oktapra Amtono <oktapra.amtono@gmail.com>
radcolor
pushed a commit
that referenced
this pull request
Dec 29, 2020
[ Upstream commit 4a9d81caf841cd2c0ae36abec9c2963bf21d0284 ] If the elem is deleted during be iterated on it, the iteration process will fall into an endless loop. kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137] PID: 17137 TASK: ffff8818d93c0000 CPU: 4 COMMAND: "nfsd" [exception RIP: __state_in_grace+76] RIP: ffffffffc00e817c RSP: ffff8818d3aefc98 RFLAGS: 00000246 RAX: ffff881dc0c38298 RBX: ffffffff81b03580 RCX: ffff881dc02c9f50 RDX: ffff881e3fce8500 RSI: 0000000000000001 RDI: ffffffff81b03580 RBP: ffff8818d3aefca0 R8: 0000000000000020 R9: ffff8818d3aefd40 R10: ffff88017fc03800 R11: ffff8818e83933c0 R12: ffff8818d3aefd40 R13: 0000000000000000 R14: ffff8818e8391068 R15: ffff8818fa6e4000 CS: 0010 SS: 0018 #0 [ffff8818d3aefc98] opens_in_grace at ffffffffc00e81e3 [grace] #1 [ffff8818d3aefca8] nfs4_preprocess_stateid_op at ffffffffc02a3e6c [nfsd] #2 [ffff8818d3aefd18] nfsd4_write at ffffffffc028ed5b [nfsd] #3 [ffff8818d3aefd80] nfsd4_proc_compound at ffffffffc0290a0d [nfsd] #4 [ffff8818d3aefdd0] nfsd_dispatch at ffffffffc027b800 [nfsd] #5 [ffff8818d3aefe08] svc_process_common at ffffffffc02017f3 [sunrpc] #6 [ffff8818d3aefe70] svc_process at ffffffffc0201ce3 [sunrpc] #7 [ffff8818d3aefe98] nfsd at ffffffffc027b117 [nfsd] #8 [ffff8818d3aefec8] kthread at ffffffff810b88c1 #9 [ffff8818d3aeff50] ret_from_fork at ffffffff816d1607 The troublemake elem: crash> lock_manager ffff881dc0c38298 struct lock_manager { list = { next = 0xffff881dc0c38298, prev = 0xffff881dc0c38298 }, block_opens = false } Fixes: c87fb4a ("lockd: NLM grace period shouldn't block NFSv4 opens") Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Mar 9, 2021
[ Upstream commit c5c97cadd7ed13381cb6b4bef5c841a66938d350 ]
The ubsan reported the following error. It was because sample's raw
data missed u32 padding at the end. So it broke the alignment of the
array after it.
The raw data contains an u32 size prefix so the data size should have
an u32 padding after 8-byte aligned data.
27: Sample parsing :util/synthetic-events.c:1539:4:
runtime error: store to misaligned address 0x62100006b9bc for type
'__u64' (aka 'unsigned long long'), which requires 8 byte alignment
0x62100006b9bc: note: pointer points here
00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
#0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13
#1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8
#2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9
#3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9
#4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9
#5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4
#6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9
#7 0x56153264e796 in run_builtin perf.c:312:11
#8 0x56153264cf03 in handle_internal_command perf.c:364:8
#9 0x56153264e47d in run_argv perf.c:408:2
#10 0x56153264c9a9 in main perf.c:538:3
#11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc)
#12 0x561532596828 in _start ...
SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use
util/synthetic-events.c:1539:4 in
Fixes: 045f8cd ("perf tests: Add a sample parsing test")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Mar 9, 2021
[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ] kernel panic trace looks like: #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe [exception RIP: amp_read_loc_assoc_final_data+63] RIP: ffffffffc06ab54f RSP: ffffb9e08698fd68 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c8845a5a000 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffff8c8b9153d000 RDI: ffff8c8845a5a000 RBP: ffffb9e08698fe40 R8: 00000000000330e0 R9: ffffffffc0675c94 R10: ffffb9e08698fe58 R11: 0000000000000001 R12: ffff8c8b9cbf6200 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8c8b2026da0b ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth] #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth] #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7 hcon->amp_mgr seems NULL triggered kernel panic in following line inside function amp_read_loc_assoc_final_data set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state); Fixed by checking NULL for mgr. Signed-off-by: Gopal Tiwari <gtiwari@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
radcolor
pushed a commit
that referenced
this pull request
Jun 10, 2021
…nect commit 4ac06a1e013cf5fdd963317ffd3b968560f33bba upstream. It's possible to trigger NULL pointer dereference by local unprivileged user, when calling getsockname() after failed bind() (e.g. the bind fails because LLCP_SAP_MAX used as SAP): BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 1 PID: 426 Comm: llcp_sock_getna Not tainted 5.13.0-rc2-next-20210521+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014 Call Trace: llcp_sock_getname+0xb1/0xe0 __sys_getpeername+0x95/0xc0 ? lockdep_hardirqs_on_prepare+0xd5/0x180 ? syscall_enter_from_user_mode+0x1c/0x40 __x64_sys_getpeername+0x11/0x20 do_syscall_64+0x36/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae This can be reproduced with Syzkaller C repro (bind followed by getpeername): https://syzkaller.appspot.com/x/repro.c?x=14def446e00000 Cc: <stable@vger.kernel.org> Fixes: d646960 ("NFC: Initial LLCP support") Reported-by: syzbot+80fb126e7f7d8b1a5914@syzkaller.appspotmail.com Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210531072138.5219-1-krzysztof.kozlowski@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
11 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.