Fix: Kernel panic at boot due to incorrect BAR specification for intel-lpss-pci by qzed · Pull Request #13 · linux-surface/kernel

qzed · 2019-10-28T00:08:50Z

Fix for #12, taken from LKML.

Upstream LKML: https://lkml.org/lkml/2019/10/16/1230
Upstream bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203485

On sparc64, the whole physical IO address space is accessible using physically addressed loads and stores. *_uc does nothing like the others. Cc: <stable@vger.kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Tuowen Zhao <ztuowen@gmail.com> Acked-by: David S. Miller <davem@davemloft.net>

Implement a resource managed strongly uncachable ioremap function. Cc: <stable@vger.kernel.org> Tested-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Tuowen Zhao <ztuowen@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

Some BIOS erroneously specifies write-combining BAR for intel-lpss-pci in MTRR. This will cause the system to hang during boot. If possible, this bug could be corrected with a firmware update. This patch use devm_ioremap_uc to overwrite/ignore the MTRR settings by forcing the use of strongly uncachable pages for intel-lpss. The BIOS bug is present on Dell XPS 13 7390 2-in-1: [ 0.001734] 5 base 4000000000 mask 6000000000 write-combining 4000000000-7fffffffff : PCI Bus 0000:00 4000000000-400fffffff : 0000:00:02.0 (i915) 4010000000-4010000fff : 0000:00:15.0 (intel-lpss-pci) Link: https://bugzilla.kernel.org/show_bug.cgi?id=203485 Cc: <stable@vger.kernel.org> Tested-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Tuowen Zhao <ztuowen@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Tested-by: Roman Gilg <subdiff@gmail.com>

Signed-off-by: Tuowen Zhao <ztuowen@gmail.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org>

@c-

Running stress-test test_2 in mtd-utils on ubi device, sometimes we can get following oops message: BUG: unable to handle page fault for address: ffffffff00000140 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 280a067 P4D 280a067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0 -0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Workqueue: writeback wb_workfn (flush-ubifs_0_0) RIP: 0010:rb_next_postorder+0x2e/0xb0 Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db 03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a 10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03 RSP: 0018:ffffc90000887758 EFLAGS: 00010202 RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001 RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400 RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000 R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000 R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8 FS: 0000000000000000(0000) GS:ffff88813ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: destroy_old_idx+0x5d/0xa0 [ubifs] ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs] do_commit+0x3eb/0x830 [ubifs] ubifs_run_commit+0xdc/0x1c0 [ubifs] Above Oops are due to the slab-out-of-bounds happened in do-while of function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In function layout_in_gaps, there is a do-while loop placing index nodes into the gaps created by obsolete index nodes in non-empty index LEBs until rest index nodes can totally be placed into pre-allocated empty LEBs. @c->gap_lebs points to a memory area(integer array) which records LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB is found, corresponding lnum will be incrementally written into the memory area pointed by @c->gap_lebs. The size ((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before do-while loop and can not be changed in the loop. But @c->lst.idx_lebs could be increased by function ubifs_change_lp (called by layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the loop. So, sometimes oob happens when number of cycles in do-while loop exceeds the original value of @c->lst.idx_lebs. See detail in https://bugzilla.kernel.org/show_bug.cgi?id=204229. This patch fixes oob in layout_in_gaps. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>

If a faulty initiator fails to bind the socket to the iSCSI connection before emitting a command, for instance, a subsequent send_pdu, it will crash the kernel due to a null pointer dereference in sock_sendmsg(), as shown in the log below. This patch makes sure the bind succeeded before trying to use the socket. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker [ 24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20 [...] [ 24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282 [ 24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001 [ 24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000 [ 24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030 [ 24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00 [ 24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90 [ 24.166919] FS: 0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000 [ 24.167890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0 [ 24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 24.171214] Call Trace: [ 24.171537] security_socket_sendmsg+0x3a/0x50 [ 24.172079] sock_sendmsg+0x16/0x60 [ 24.172506] iscsi_sw_tcp_xmit_segment+0x77/0x120 [ 24.173076] iscsi_sw_tcp_pdu_xmit+0x58/0x170 [ 24.173604] ? iscsi_dbg_trace+0x63/0x80 [ 24.174087] iscsi_tcp_task_xmit+0x101/0x280 [ 24.174666] iscsi_xmit_task+0x83/0x110 [ 24.175206] iscsi_xmitworker+0x57/0x380 [ 24.175757] ? __schedule+0x2a2/0x700 [ 24.176273] process_one_work+0x1b5/0x360 [ 24.176837] worker_thread+0x50/0x3c0 [ 24.177353] kthread+0xf9/0x130 [ 24.177799] ? process_one_work+0x360/0x360 [ 24.178401] ? kthread_park+0x90/0x90 [ 24.178915] ret_from_fork+0x35/0x40 [ 24.179421] Modules linked in: [ 24.179856] CR2: 0000000000000018 [ 24.180327] ---[ end trace b4b7674b6df5f480 ]--- Signed-off-by: Anatol Pomazau <anatol@google.com> Co-developed-by: Frank Mayhar <fmayhar@google.com> Signed-off-by: Frank Mayhar <fmayhar@google.com> Co-developed-by: Bharath Ravi <rbharath@google.com> Signed-off-by: Bharath Ravi <rbharath@google.com> Co-developed-by: Khazhimsel Kumykov <khazhy@google.com> Signed-off-by: Khazhimsel Kumykov <khazhy@google.com> Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A kernel built with KASAN && FTRACE_WITH_REGS && !MODULES, produces a boot-time splat in the bowels of ftrace: | [ 0.000000] ftrace: allocating 32281 entries in 127 pages | [ 0.000000] ------------[ cut here ]------------ | [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2019 ftrace_bug+0x27c/0x328 | [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc3-00008-g7f08ae53a7e3 #13 | [ 0.000000] Hardware name: linux,dummy-virt (DT) | [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) | [ 0.000000] pc : ftrace_bug+0x27c/0x328 | [ 0.000000] lr : ftrace_init+0x640/0x6cc | [ 0.000000] sp : ffffa000120e7e00 | [ 0.000000] x29: ffffa000120e7e00 x28: ffff00006ac01b10 | [ 0.000000] x27: ffff00006ac898c0 x26: dfffa00000000000 | [ 0.000000] x25: ffffa000120ef290 x24: ffffa0001216df40 | [ 0.000000] x23: 000000000000018d x22: ffffa0001244c700 | [ 0.000000] x21: ffffa00011bf393c x20: ffff00006ac898c0 | [ 0.000000] x19: 00000000ffffffff x18: 0000000000001584 | [ 0.000000] x17: 0000000000001540 x16: 0000000000000007 | [ 0.000000] x15: 0000000000000000 x14: ffffa00010432770 | [ 0.000000] x13: ffff940002483519 x12: 1ffff40002483518 | [ 0.000000] x11: 1ffff40002483518 x10: ffff940002483518 | [ 0.000000] x9 : dfffa00000000000 x8 : 0000000000000001 | [ 0.000000] x7 : ffff940002483519 x6 : ffffa0001241a8c0 | [ 0.000000] x5 : ffff940002483519 x4 : ffff940002483519 | [ 0.000000] x3 : ffffa00011780870 x2 : 0000000000000001 | [ 0.000000] x1 : 1fffe0000d591318 x0 : 0000000000000000 | [ 0.000000] Call trace: | [ 0.000000] ftrace_bug+0x27c/0x328 | [ 0.000000] ftrace_init+0x640/0x6cc | [ 0.000000] start_kernel+0x27c/0x654 | [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x30/0x60 with crng_init=0 | [ 0.000000] ---[ end trace 0000000000000000 ]--- | [ 0.000000] ftrace faulted on writing | [ 0.000000] [<ffffa00011bf393c>] _GLOBAL__sub_D_65535_0___tracepoint_initcall_level+0x4/0x28 | [ 0.000000] Initializing ftrace call sites | [ 0.000000] ftrace record flags: 0 | [ 0.000000] (0) | [ 0.000000] expected tramp: ffffa000100b3344 This is due to an unfortunate combination of several factors. Building with KASAN results in the compiler generating anonymous functions to register/unregister global variables against the shadow memory. These functions are placed in .text.startup/.text.exit, and given mangled names like _GLOBAL__sub_{I,D}_65535_0_$OTHER_SYMBOL. The kernel linker script places these in .init.text and .exit.text respectively, which are both discarded at runtime as part of initmem. Building with FTRACE_WITH_REGS uses -fpatchable-function-entry=2, which also instruments KASAN's anonymous functions. When these are discarded with the rest of initmem, ftrace removes dangling references to these call sites. Building without MODULES implicitly disables STRICT_MODULE_RWX, and causes arm64's patch_map() function to treat any !core_kernel_text() symbol as something that can be modified in-place. As core_kernel_text() is only true for .text and .init.text, with the latter depending on system_state < SYSTEM_RUNNING, we'll treat .exit.text as something that can be patched in-place. However, .exit.text is mapped read-only. Hence in this configuration the ftrace init code blows up while trying to patch one of the functions generated by KASAN. We could try to filter out the call sites in .exit.text rather than initializing them, but this would be inconsistent with how we handle .init.text, and requires hooking into core bits of ftrace. The behaviour of patch_map() is also inconsistent today, so instead let's clean that up and have it consistently handle .exit.text. This patch teaches patch_map() to handle .exit.text at init time, preventing the boot-time splat above. The flow of patch_map() is reworked to make the logic clearer and minimize redundant conditionality. Fixes: 3b23e49 ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Torsten Duwe <duwe@suse.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

[ Upstream commit 238191d ] If a faulty initiator fails to bind the socket to the iSCSI connection before emitting a command, for instance, a subsequent send_pdu, it will crash the kernel due to a null pointer dereference in sock_sendmsg(), as shown in the log below. This patch makes sure the bind succeeded before trying to use the socket. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker [ 24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20 [...] [ 24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282 [ 24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001 [ 24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000 [ 24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030 [ 24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00 [ 24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90 [ 24.166919] FS: 0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000 [ 24.167890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0 [ 24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 24.171214] Call Trace: [ 24.171537] security_socket_sendmsg+0x3a/0x50 [ 24.172079] sock_sendmsg+0x16/0x60 [ 24.172506] iscsi_sw_tcp_xmit_segment+0x77/0x120 [ 24.173076] iscsi_sw_tcp_pdu_xmit+0x58/0x170 [ 24.173604] ? iscsi_dbg_trace+0x63/0x80 [ 24.174087] iscsi_tcp_task_xmit+0x101/0x280 [ 24.174666] iscsi_xmit_task+0x83/0x110 [ 24.175206] iscsi_xmitworker+0x57/0x380 [ 24.175757] ? __schedule+0x2a2/0x700 [ 24.176273] process_one_work+0x1b5/0x360 [ 24.176837] worker_thread+0x50/0x3c0 [ 24.177353] kthread+0xf9/0x130 [ 24.177799] ? process_one_work+0x360/0x360 [ 24.178401] ? kthread_park+0x90/0x90 [ 24.178915] ret_from_fork+0x35/0x40 [ 24.179421] Modules linked in: [ 24.179856] CR2: 0000000000000018 [ 24.180327] ---[ end trace b4b7674b6df5f480 ]--- Signed-off-by: Anatol Pomazau <anatol@google.com> Co-developed-by: Frank Mayhar <fmayhar@google.com> Signed-off-by: Frank Mayhar <fmayhar@google.com> Co-developed-by: Bharath Ravi <rbharath@google.com> Signed-off-by: Bharath Ravi <rbharath@google.com> Co-developed-by: Khazhimsel Kumykov <khazhy@google.com> Signed-off-by: Khazhimsel Kumykov <khazhy@google.com> Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

@c-

[ Upstream commit 6abf572 ] Running stress-test test_2 in mtd-utils on ubi device, sometimes we can get following oops message: BUG: unable to handle page fault for address: ffffffff00000140 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 280a067 P4D 280a067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0 -0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Workqueue: writeback wb_workfn (flush-ubifs_0_0) RIP: 0010:rb_next_postorder+0x2e/0xb0 Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db 03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a 10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03 RSP: 0018:ffffc90000887758 EFLAGS: 00010202 RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001 RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400 RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000 R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000 R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8 FS: 0000000000000000(0000) GS:ffff88813ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: destroy_old_idx+0x5d/0xa0 [ubifs] ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs] do_commit+0x3eb/0x830 [ubifs] ubifs_run_commit+0xdc/0x1c0 [ubifs] Above Oops are due to the slab-out-of-bounds happened in do-while of function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In function layout_in_gaps, there is a do-while loop placing index nodes into the gaps created by obsolete index nodes in non-empty index LEBs until rest index nodes can totally be placed into pre-allocated empty LEBs. @c->gap_lebs points to a memory area(integer array) which records LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB is found, corresponding lnum will be incrementally written into the memory area pointed by @c->gap_lebs. The size ((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before do-while loop and can not be changed in the loop. But @c->lst.idx_lebs could be increased by function ubifs_change_lp (called by layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the loop. So, sometimes oob happens when number of cycles in do-while loop exceeds the original value of @c->lst.idx_lebs. See detail in https://bugzilla.kernel.org/show_bug.cgi?id=204229. This patch fixes oob in layout_in_gaps. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e1aa1a1 ] Fix following lockdep warning disabling bh in ath_dynack_node_init/ath_dynack_node_deinit [ 75.955878] -------------------------------- [ 75.955880] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 75.955884] swapper/0/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 75.955888] 00000000792a7ee0 (&(&da->qlock)->rlock){+.?.}, at: ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.955905] {SOFTIRQ-ON-W} state was registered at: [ 75.955912] lock_acquire+0x9a/0x160 [ 75.955917] _raw_spin_lock+0x2c/0x70 [ 75.955927] ath_dynack_node_init+0x2a/0x60 [ath9k_hw] [ 75.955934] ath9k_sta_state+0xec/0x160 [ath9k] [ 75.955976] drv_sta_state+0xb2/0x740 [mac80211] [ 75.956008] sta_info_insert_finish+0x21a/0x420 [mac80211] [ 75.956039] sta_info_insert_rcu+0x12b/0x2c0 [mac80211] [ 75.956069] sta_info_insert+0x7/0x70 [mac80211] [ 75.956093] ieee80211_prep_connection+0x42e/0x730 [mac80211] [ 75.956120] ieee80211_mgd_auth.cold+0xb9/0x15c [mac80211] [ 75.956152] cfg80211_mlme_auth+0x143/0x350 [cfg80211] [ 75.956169] nl80211_authenticate+0x25e/0x2b0 [cfg80211] [ 75.956172] genl_family_rcv_msg+0x198/0x400 [ 75.956174] genl_rcv_msg+0x42/0x90 [ 75.956176] netlink_rcv_skb+0x35/0xf0 [ 75.956178] genl_rcv+0x1f/0x30 [ 75.956180] netlink_unicast+0x154/0x200 [ 75.956182] netlink_sendmsg+0x1bf/0x3d0 [ 75.956186] ___sys_sendmsg+0x2c2/0x2f0 [ 75.956187] __sys_sendmsg+0x44/0x80 [ 75.956190] do_syscall_64+0x55/0x1a0 [ 75.956192] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 75.956194] irq event stamp: 2357092 [ 75.956196] hardirqs last enabled at (2357092): [<ffffffff818c62de>] _raw_spin_unlock_irqrestore+0x3e/0x50 [ 75.956199] hardirqs last disabled at (2357091): [<ffffffff818c60b1>] _raw_spin_lock_irqsave+0x11/0x80 [ 75.956202] softirqs last enabled at (2357072): [<ffffffff8106dc09>] irq_enter+0x59/0x60 [ 75.956204] softirqs last disabled at (2357073): [<ffffffff8106dcbe>] irq_exit+0xae/0xc0 [ 75.956206] other info that might help us debug this: [ 75.956207] Possible unsafe locking scenario: [ 75.956208] CPU0 [ 75.956209] ---- [ 75.956210] lock(&(&da->qlock)->rlock); [ 75.956213] <Interrupt> [ 75.956214] lock(&(&da->qlock)->rlock); [ 75.956216] *** DEADLOCK *** [ 75.956217] 1 lock held by swapper/0/0: [ 75.956219] #0: 000000003bb5675c (&(&sc->sc_pcu_lock)->rlock){+.-.}, at: ath9k_tasklet+0x55/0x240 [ath9k] [ 75.956225] stack backtrace: [ 75.956228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1-wdn+ #13 [ 75.956229] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009 [ 75.956231] Call Trace: [ 75.956233] <IRQ> [ 75.956236] dump_stack+0x67/0x90 [ 75.956239] mark_lock+0x4c1/0x640 [ 75.956242] ? check_usage_backwards+0x130/0x130 [ 75.956245] ? sched_clock_local+0x12/0x80 [ 75.956247] __lock_acquire+0x484/0x7a0 [ 75.956250] ? __lock_acquire+0x3b9/0x7a0 [ 75.956252] lock_acquire+0x9a/0x160 [ 75.956259] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956262] _raw_spin_lock_bh+0x34/0x80 [ 75.956268] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956275] ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956280] ath_rx_tasklet+0xd09/0xe90 [ath9k] [ 75.956286] ath9k_tasklet+0x102/0x240 [ath9k] [ 75.956288] tasklet_action_common.isra.0+0x6d/0x170 [ 75.956291] __do_softirq+0xcc/0x425 [ 75.956294] irq_exit+0xae/0xc0 [ 75.956296] do_IRQ+0x8a/0x110 [ 75.956298] common_interrupt+0xf/0xf [ 75.956300] </IRQ> [ 75.956303] RIP: 0010:cpuidle_enter_state+0xb2/0x400 [ 75.956308] RSP: 0018:ffffffff82203e70 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd7 [ 75.956310] RAX: ffffffff82219800 RBX: ffffffff822bd0a0 RCX: 0000000000000000 [ 75.956312] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff82219800 [ 75.956314] RBP: ffff888155a01c00 R08: 00000011af51aabe R09: 0000000000000000 [ 75.956315] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 75.956317] R13: 00000011af51aabe R14: 0000000000000003 R15: ffffffff82219800 [ 75.956321] cpuidle_enter+0x24/0x40 [ 75.956323] do_idle+0x1ac/0x220 [ 75.956326] cpu_startup_entry+0x14/0x20 [ 75.956329] start_kernel+0x482/0x489 [ 75.956332] secondary_startup_64+0xa4/0xb0 Fixes: c774d57 ("ath9k: add dynamic ACK timeout estimation") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7ac6269 ] The LCD timing definitions between Linux DRM vs Allwinner are different, below diagram shows this clear differences. Active Front Sync Back Region Porch Porch <-----------------------><----------------><--------------><--------------> //////////////////////| ////////////////////// | ////////////////////// |.................. ................ ________________ <----- [hv]display -----> <------------- [hv]sync_start ------------> <--------------------- [hv]sync_end ----------------------> <-------------------------------- [hv]total ------------------------------> <----- lcd_[xy] --------> <- lcd_[hv]spw -> <---------- lcd_[hv]bp ---------> <-------------------------------- lcd_[hv]t ------------------------------> The DSI driver misinterpreted the hbp term from the BSP code to refer only to the backporch, when in fact it was backporch + sync. Thus the driver incorrectly used the horizontal front porch plus sync in its calculation of the DRQ set bit value, when it should not have included the sync timing. Including additional sync timings leads to flip_done timed out as: WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0 [CRTC:46:crtc-0] vblank wait timed out Modules linked in: CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13 Hardware name: Allwinner sun8i Family Workqueue: events deferred_probe_work_func [<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14) [<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98) [<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114) [<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68) [<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0) [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c) [<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128) [<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc) [<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0) [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54) [<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac) [<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104) [<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390) [<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4) [<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc) [<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84) [<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60) [<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20) [<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8) [<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c) [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8) [<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118) [<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160) [<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0) [<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140) [<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234) [<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c) [<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8) [<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160) [<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8) [<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c) [<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c) [<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90) [<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420) [<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0) [<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c) [<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xde539fb0 to 0xde539ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace b57eb1e5c64c6b8b ]--- random: fast init done [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out With the terms(as described in above diagram) fixed, the panel displays correctly without any timeouts. Tested-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-2-jagan@amarulasolutions.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 238191d ] If a faulty initiator fails to bind the socket to the iSCSI connection before emitting a command, for instance, a subsequent send_pdu, it will crash the kernel due to a null pointer dereference in sock_sendmsg(), as shown in the log below. This patch makes sure the bind succeeded before trying to use the socket. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker [ 24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20 [...] [ 24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282 [ 24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001 [ 24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000 [ 24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030 [ 24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00 [ 24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90 [ 24.166919] FS: 0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000 [ 24.167890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0 [ 24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 24.171214] Call Trace: [ 24.171537] security_socket_sendmsg+0x3a/0x50 [ 24.172079] sock_sendmsg+0x16/0x60 [ 24.172506] iscsi_sw_tcp_xmit_segment+0x77/0x120 [ 24.173076] iscsi_sw_tcp_pdu_xmit+0x58/0x170 [ 24.173604] ? iscsi_dbg_trace+0x63/0x80 [ 24.174087] iscsi_tcp_task_xmit+0x101/0x280 [ 24.174666] iscsi_xmit_task+0x83/0x110 [ 24.175206] iscsi_xmitworker+0x57/0x380 [ 24.175757] ? __schedule+0x2a2/0x700 [ 24.176273] process_one_work+0x1b5/0x360 [ 24.176837] worker_thread+0x50/0x3c0 [ 24.177353] kthread+0xf9/0x130 [ 24.177799] ? process_one_work+0x360/0x360 [ 24.178401] ? kthread_park+0x90/0x90 [ 24.178915] ret_from_fork+0x35/0x40 [ 24.179421] Modules linked in: [ 24.179856] CR2: 0000000000000018 [ 24.180327] ---[ end trace b4b7674b6df5f480 ]--- Signed-off-by: Anatol Pomazau <anatol@google.com> Co-developed-by: Frank Mayhar <fmayhar@google.com> Signed-off-by: Frank Mayhar <fmayhar@google.com> Co-developed-by: Bharath Ravi <rbharath@google.com> Signed-off-by: Bharath Ravi <rbharath@google.com> Co-developed-by: Khazhimsel Kumykov <khazhy@google.com> Signed-off-by: Khazhimsel Kumykov <khazhy@google.com> Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8354d88 ] Ensure we grab an active reference in cifs superblock while doing failover to prevent automounts (DFS links) of expiring and then destroying the superblock pointer. This patch fixes the following KASAN report: [ 464.301462] BUG: KASAN: use-after-free in cifs_reconnect+0x6ab/0x1350 [ 464.303052] Read of size 8 at addr ffff888155e580d0 by task cifsd/1107 [ 464.304682] CPU: 3 PID: 1107 Comm: cifsd Not tainted 5.4.0-rc4+ #13 [ 464.305552] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58-rebuilt.opensuse.org 04/01/2014 [ 464.307146] Call Trace: [ 464.307875] dump_stack+0x5b/0x90 [ 464.308631] print_address_description.constprop.0+0x16/0x200 [ 464.309478] ? cifs_reconnect+0x6ab/0x1350 [ 464.310253] ? cifs_reconnect+0x6ab/0x1350 [ 464.311040] __kasan_report.cold+0x1a/0x41 [ 464.311811] ? cifs_reconnect+0x6ab/0x1350 [ 464.312563] kasan_report+0xe/0x20 [ 464.313300] cifs_reconnect+0x6ab/0x1350 [ 464.314062] ? extract_hostname.part.0+0x90/0x90 [ 464.314829] ? printk+0xad/0xde [ 464.315525] ? _raw_spin_lock+0x7c/0xd0 [ 464.316252] ? _raw_read_lock_irq+0x40/0x40 [ 464.316961] ? ___ratelimit+0xed/0x182 [ 464.317655] cifs_readv_from_socket+0x289/0x3b0 [ 464.318386] cifs_read_from_socket+0x98/0xd0 [ 464.319078] ? cifs_readv_from_socket+0x3b0/0x3b0 [ 464.319782] ? try_to_wake_up+0x43c/0xa90 [ 464.320463] ? cifs_small_buf_get+0x4b/0x60 [ 464.321173] ? allocate_buffers+0x98/0x1a0 [ 464.321856] cifs_demultiplex_thread+0x218/0x14a0 [ 464.322558] ? cifs_handle_standard+0x270/0x270 [ 464.323237] ? __switch_to_asm+0x40/0x70 [ 464.323893] ? __switch_to_asm+0x34/0x70 [ 464.324554] ? __switch_to_asm+0x40/0x70 [ 464.325226] ? __switch_to_asm+0x40/0x70 [ 464.325863] ? __switch_to_asm+0x34/0x70 [ 464.326505] ? __switch_to_asm+0x40/0x70 [ 464.327161] ? __switch_to_asm+0x34/0x70 [ 464.327784] ? finish_task_switch+0xa1/0x330 [ 464.328414] ? __switch_to+0x363/0x640 [ 464.329044] ? __schedule+0x575/0xaf0 [ 464.329655] ? _raw_spin_lock_irqsave+0x82/0xe0 [ 464.330301] kthread+0x1a3/0x1f0 [ 464.330884] ? cifs_handle_standard+0x270/0x270 [ 464.331624] ? kthread_create_on_node+0xd0/0xd0 [ 464.332347] ret_from_fork+0x35/0x40 [ 464.333577] Allocated by task 1110: [ 464.334381] save_stack+0x1b/0x80 [ 464.335123] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 464.335848] cifs_smb3_do_mount+0xd4/0xb00 [ 464.336619] legacy_get_tree+0x6b/0xa0 [ 464.337235] vfs_get_tree+0x41/0x110 [ 464.337975] fc_mount+0xa/0x40 [ 464.338557] vfs_kern_mount.part.0+0x6c/0x80 [ 464.339227] cifs_dfs_d_automount+0x336/0xd29 [ 464.339846] follow_managed+0x1b1/0x450 [ 464.340449] lookup_fast+0x231/0x4a0 [ 464.341039] path_openat+0x240/0x1fd0 [ 464.341634] do_filp_open+0x126/0x1c0 [ 464.342277] do_sys_open+0x1eb/0x2c0 [ 464.342957] do_syscall_64+0x5e/0x190 [ 464.343555] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 464.344772] Freed by task 0: [ 464.345347] save_stack+0x1b/0x80 [ 464.345966] __kasan_slab_free+0x12c/0x170 [ 464.346576] kfree+0xa6/0x270 [ 464.347211] rcu_core+0x39c/0xc80 [ 464.347800] __do_softirq+0x10d/0x3da [ 464.348919] The buggy address belongs to the object at ffff888155e58000 which belongs to the cache kmalloc-256 of size 256 [ 464.350222] The buggy address is located 208 bytes inside of 256-byte region [ffff888155e58000, ffff888155e58100) [ 464.351575] The buggy address belongs to the page: [ 464.352333] page:ffffea0005579600 refcount:1 mapcount:0 mapping:ffff88815a803400 index:0x0 compound_mapcount: 0 [ 464.353583] flags: 0x200000000010200(slab|head) [ 464.354209] raw: 0200000000010200 ffffea0005576200 0000000400000004 ffff88815a803400 [ 464.355353] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 464.356458] page dumped because: kasan: bad access detected [ 464.367005] Memory state around the buggy address: [ 464.367787] ffff888155e57f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 464.368877] ffff888155e58000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 464.369967] >ffff888155e58080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 464.371111] ^ [ 464.371775] ffff888155e58100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 464.372893] ffff888155e58180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 464.373983] ================================================================== Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 32546a9 ] This patch moves the final part of the cifsFileInfo_put() logic where we need a write lock on lock_sem to be processed in a separate thread that holds no other locks. This is to prevent deadlocks like the one below: > there are 6 processes looping to while trying to down_write > cinode->lock_sem, 5 of them from _cifsFileInfo_put, and one from > cifs_new_fileinfo > > and there are 5 other processes which are blocked, several of them > waiting on either PG_writeback or PG_locked (which are both set), all > for the same page of the file > > 2 inode_lock() (inode->i_rwsem) for the file > 1 wait_on_page_writeback() for the page > 1 down_read(inode->i_rwsem) for the inode of the directory > 1 inode_lock()(inode->i_rwsem) for the inode of the directory > 1 __lock_page > > > so processes are blocked waiting on: > page flags PG_locked and PG_writeback for one specific page > inode->i_rwsem for the directory > inode->i_rwsem for the file > cifsInodeInflock_sem > > > > here are the more gory details (let me know if I need to provide > anything more/better): > > [0 00:48:22.765] [UN] PID: 8863 TASK: ffff8c691547c5c0 CPU: 3 > COMMAND: "reopen_file" > #0 [ffff9965007e3ba8] __schedule at ffffffff9b6e6095 > #1 [ffff9965007e3c38] schedule at ffffffff9b6e64df > #2 [ffff9965007e3c48] rwsem_down_write_slowpath at ffffffff9af283d7 > #3 [ffff9965007e3cb8] legitimize_path at ffffffff9b0f975d > #4 [ffff9965007e3d08] path_openat at ffffffff9b0fe55d > #5 [ffff9965007e3dd8] do_filp_open at ffffffff9b100a33 > #6 [ffff9965007e3ee0] do_sys_open at ffffffff9b0eb2d6 > #7 [ffff9965007e3f38] do_syscall_64 at ffffffff9ae04315 > * (I think legitimize_path is bogus) > > in path_openat > } else { > const char *s = path_init(nd, flags); > while (!(error = link_path_walk(s, nd)) && > (error = do_last(nd, file, op)) > 0) { <<<< > > do_last: > if (open_flag & O_CREAT) > inode_lock(dir->d_inode); <<<< > else > so it's trying to take inode->i_rwsem for the directory > > DENTRY INODE SUPERBLK TYPE PATH > ffff8c68bb8e79c0 ffff8c691158ef20 ffff8c6915bf9000 DIR /mnt/vm1_smb/ > inode.i_rwsem is ffff8c691158efc0 > > <struct rw_semaphore 0xffff8c691158efc0>: > owner: <struct task_struct 0xffff8c6914275d00> (UN - 8856 - > reopen_file), counter: 0x0000000000000003 > waitlist: 2 > 0xffff9965007e3c90 8863 reopen_file UN 0 1:29:22.926 > RWSEM_WAITING_FOR_WRITE > 0xffff996500393e00 9802 ls UN 0 1:17:26.700 > RWSEM_WAITING_FOR_READ > > > the owner of the inode.i_rwsem of the directory is: > > [0 00:00:00.109] [UN] PID: 8856 TASK: ffff8c6914275d00 CPU: 3 > COMMAND: "reopen_file" > #0 [ffff99650065b828] __schedule at ffffffff9b6e6095 > #1 [ffff99650065b8b8] schedule at ffffffff9b6e64df > #2 [ffff99650065b8c8] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff99650065b940] msleep at ffffffff9af573a9 > #4 [ffff99650065b948] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs] > #5 [ffff99650065ba38] cifs_writepage_locked at ffffffffc0a0b8f3 [cifs] > #6 [ffff99650065bab0] cifs_launder_page at ffffffffc0a0bb72 [cifs] > #7 [ffff99650065bb30] invalidate_inode_pages2_range at ffffffff9b04d4bd > #8 [ffff99650065bcb8] cifs_invalidate_mapping at ffffffffc0a11339 [cifs] > #9 [ffff99650065bcd0] cifs_revalidate_mapping at ffffffffc0a1139a [cifs] > #10 [ffff99650065bcf0] cifs_d_revalidate at ffffffffc0a014f6 [cifs] > #11 [ffff99650065bd08] path_openat at ffffffff9b0fe7f7 > #12 [ffff99650065bdd8] do_filp_open at ffffffff9b100a33 > #13 [ffff99650065bee0] do_sys_open at ffffffff9b0eb2d6 > #14 [ffff99650065bf38] do_syscall_64 at ffffffff9ae04315 > > cifs_launder_page is for page 0xffffd1e2c07d2480 > > crash> page.index,mapping,flags 0xffffd1e2c07d2480 > index = 0x8 > mapping = 0xffff8c68f3cd0db0 > flags = 0xfffffc0008095 > > PAGE-FLAG BIT VALUE > PG_locked 0 0000001 > PG_uptodate 2 0000004 > PG_lru 4 0000010 > PG_waiters 7 0000080 > PG_writeback 15 0008000 > > > inode is ffff8c68f3cd0c40 > inode.i_rwsem is ffff8c68f3cd0ce0 > DENTRY INODE SUPERBLK TYPE PATH > ffff8c68a1f1b480 ffff8c68f3cd0c40 ffff8c6915bf9000 REG > /mnt/vm1_smb/testfile.8853 > > > this process holds the inode->i_rwsem for the parent directory, is > laundering a page attached to the inode of the file it's opening, and in > _cifsFileInfo_put is trying to down_write the cifsInodeInflock_sem > for the file itself. > > > <struct rw_semaphore 0xffff8c68f3cd0ce0>: > owner: <struct task_struct 0xffff8c6914272e80> (UN - 8854 - > reopen_file), counter: 0x0000000000000003 > waitlist: 1 > 0xffff9965005dfd80 8855 reopen_file UN 0 1:29:22.912 > RWSEM_WAITING_FOR_WRITE > > this is the inode.i_rwsem for the file > > the owner: > > [0 00:48:22.739] [UN] PID: 8854 TASK: ffff8c6914272e80 CPU: 2 > COMMAND: "reopen_file" > #0 [ffff99650054fb38] __schedule at ffffffff9b6e6095 > #1 [ffff99650054fbc8] schedule at ffffffff9b6e64df > #2 [ffff99650054fbd8] io_schedule at ffffffff9b6e68e2 > #3 [ffff99650054fbe8] __lock_page at ffffffff9b03c56f > #4 [ffff99650054fc80] pagecache_get_page at ffffffff9b03dcdf > #5 [ffff99650054fcc0] grab_cache_page_write_begin at ffffffff9b03ef4c > #6 [ffff99650054fcd0] cifs_write_begin at ffffffffc0a064ec [cifs] > #7 [ffff99650054fd30] generic_perform_write at ffffffff9b03bba4 > #8 [ffff99650054fda8] __generic_file_write_iter at ffffffff9b04060a > #9 [ffff99650054fdf0] cifs_strict_writev.cold.70 at ffffffffc0a4469b [cifs] > #10 [ffff99650054fe48] new_sync_write at ffffffff9b0ec1dd > #11 [ffff99650054fed0] vfs_write at ffffffff9b0eed35 > #12 [ffff99650054ff00] ksys_write at ffffffff9b0eefd9 > #13 [ffff99650054ff38] do_syscall_64 at ffffffff9ae04315 > > the process holds the inode->i_rwsem for the file to which it's writing, > and is trying to __lock_page for the same page as in the other processes > > > the other tasks: > [0 00:00:00.028] [UN] PID: 8859 TASK: ffff8c6915479740 CPU: 2 > COMMAND: "reopen_file" > #0 [ffff9965007b39d8] __schedule at ffffffff9b6e6095 > #1 [ffff9965007b3a68] schedule at ffffffff9b6e64df > #2 [ffff9965007b3a78] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff9965007b3af0] msleep at ffffffff9af573a9 > #4 [ffff9965007b3af8] cifs_new_fileinfo.cold.61 at ffffffffc0a42a07 [cifs] > #5 [ffff9965007b3b78] cifs_open at ffffffffc0a0709d [cifs] > #6 [ffff9965007b3cd8] do_dentry_open at ffffffff9b0e9b7a > #7 [ffff9965007b3d08] path_openat at ffffffff9b0fe34f > #8 [ffff9965007b3dd8] do_filp_open at ffffffff9b100a33 > #9 [ffff9965007b3ee0] do_sys_open at ffffffff9b0eb2d6 > #10 [ffff9965007b3f38] do_syscall_64 at ffffffff9ae04315 > > this is opening the file, and is trying to down_write cinode->lock_sem > > > [0 00:00:00.041] [UN] PID: 8860 TASK: ffff8c691547ae80 CPU: 2 > COMMAND: "reopen_file" > [0 00:00:00.057] [UN] PID: 8861 TASK: ffff8c6915478000 CPU: 3 > COMMAND: "reopen_file" > [0 00:00:00.059] [UN] PID: 8858 TASK: ffff8c6914271740 CPU: 2 > COMMAND: "reopen_file" > [0 00:00:00.109] [UN] PID: 8862 TASK: ffff8c691547dd00 CPU: 6 > COMMAND: "reopen_file" > #0 [ffff9965007c3c78] __schedule at ffffffff9b6e6095 > #1 [ffff9965007c3d08] schedule at ffffffff9b6e64df > #2 [ffff9965007c3d18] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff9965007c3d90] msleep at ffffffff9af573a9 > #4 [ffff9965007c3d98] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs] > #5 [ffff9965007c3e88] cifs_close at ffffffffc0a07aaf [cifs] > #6 [ffff9965007c3ea0] __fput at ffffffff9b0efa6e > #7 [ffff9965007c3ee8] task_work_run at ffffffff9aef1614 > #8 [ffff9965007c3f20] exit_to_usermode_loop at ffffffff9ae03d6f > #9 [ffff9965007c3f38] do_syscall_64 at ffffffff9ae0444c > > closing the file, and trying to down_write cifsi->lock_sem > > > [0 00:48:22.839] [UN] PID: 8857 TASK: ffff8c6914270000 CPU: 7 > COMMAND: "reopen_file" > #0 [ffff9965006a7cc8] __schedule at ffffffff9b6e6095 > #1 [ffff9965006a7d58] schedule at ffffffff9b6e64df > #2 [ffff9965006a7d68] io_schedule at ffffffff9b6e68e2 > #3 [ffff9965006a7d78] wait_on_page_bit at ffffffff9b03cac6 > #4 [ffff9965006a7e10] __filemap_fdatawait_range at ffffffff9b03b028 > #5 [ffff9965006a7ed8] filemap_write_and_wait at ffffffff9b040165 > #6 [ffff9965006a7ef0] cifs_flush at ffffffffc0a0c2fa [cifs] > #7 [ffff9965006a7f10] filp_close at ffffffff9b0e93f1 > #8 [ffff9965006a7f30] __x64_sys_close at ffffffff9b0e9a0e > #9 [ffff9965006a7f38] do_syscall_64 at ffffffff9ae04315 > > in __filemap_fdatawait_range > wait_on_page_writeback(page); > for the same page of the file > > > > [0 00:48:22.718] [UN] PID: 8855 TASK: ffff8c69142745c0 CPU: 7 > COMMAND: "reopen_file" > #0 [ffff9965005dfc98] __schedule at ffffffff9b6e6095 > #1 [ffff9965005dfd28] schedule at ffffffff9b6e64df > #2 [ffff9965005dfd38] rwsem_down_write_slowpath at ffffffff9af283d7 > #3 [ffff9965005dfdf0] cifs_strict_writev at ffffffffc0a0c40a [cifs] > #4 [ffff9965005dfe48] new_sync_write at ffffffff9b0ec1dd > #5 [ffff9965005dfed0] vfs_write at ffffffff9b0eed35 > #6 [ffff9965005dff00] ksys_write at ffffffff9b0eefd9 > #7 [ffff9965005dff38] do_syscall_64 at ffffffff9ae04315 > > inode_lock(inode); > > > and one 'ls' later on, to see whether the rest of the mount is available > (the test file is in the root, so we get blocked up on the directory > ->i_rwsem), so the entire mount is unavailable > > [0 00:36:26.473] [UN] PID: 9802 TASK: ffff8c691436ae80 CPU: 4 > COMMAND: "ls" > #0 [ffff996500393d28] __schedule at ffffffff9b6e6095 > #1 [ffff996500393db8] schedule at ffffffff9b6e64df > #2 [ffff996500393dc8] rwsem_down_read_slowpath at ffffffff9b6e9421 > #3 [ffff996500393e78] down_read_killable at ffffffff9b6e95e2 > #4 [ffff996500393e88] iterate_dir at ffffffff9b103c56 > #5 [ffff996500393ec8] ksys_getdents64 at ffffffff9b104b0c > #6 [ffff996500393f30] __x64_sys_getdents64 at ffffffff9b104bb6 > #7 [ffff996500393f38] do_syscall_64 at ffffffff9ae04315 > > in iterate_dir: > if (shared) > res = down_read_killable(&inode->i_rwsem); <<<< > else > res = down_write_killable(&inode->i_rwsem); > Reported-by: Frank Sorenson <sorenson@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

@c-

[ Upstream commit 6abf572 ] Running stress-test test_2 in mtd-utils on ubi device, sometimes we can get following oops message: BUG: unable to handle page fault for address: ffffffff00000140 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 280a067 P4D 280a067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0 -0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Workqueue: writeback wb_workfn (flush-ubifs_0_0) RIP: 0010:rb_next_postorder+0x2e/0xb0 Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db 03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a 10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03 RSP: 0018:ffffc90000887758 EFLAGS: 00010202 RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001 RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400 RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000 R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000 R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8 FS: 0000000000000000(0000) GS:ffff88813ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: destroy_old_idx+0x5d/0xa0 [ubifs] ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs] do_commit+0x3eb/0x830 [ubifs] ubifs_run_commit+0xdc/0x1c0 [ubifs] Above Oops are due to the slab-out-of-bounds happened in do-while of function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In function layout_in_gaps, there is a do-while loop placing index nodes into the gaps created by obsolete index nodes in non-empty index LEBs until rest index nodes can totally be placed into pre-allocated empty LEBs. @c->gap_lebs points to a memory area(integer array) which records LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB is found, corresponding lnum will be incrementally written into the memory area pointed by @c->gap_lebs. The size ((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before do-while loop and can not be changed in the loop. But @c->lst.idx_lebs could be increased by function ubifs_change_lp (called by layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the loop. So, sometimes oob happens when number of cycles in do-while loop exceeds the original value of @c->lst.idx_lebs. See detail in https://bugzilla.kernel.org/show_bug.cgi?id=204229. This patch fixes oob in layout_in_gaps. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: --- a/tools/trace.py +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com

commit 7cf64b1 upstream. vt_in_use() dereferences console_driver->ttys[i] without proper locking. This is broken because the tty can be closed and freed concurrently. We could fix this by using 'READ_ONCE(console_driver->ttys[i]) != NULL' and skipping the check of tty_struct::count. But, looking at console_driver->ttys[i] isn't really appropriate anyway because even if it is NULL the tty can still be in the process of being closed. Instead, fix it by making vt_in_use() require console_lock() and check whether the vt is allocated and has port refcount > 1. This works since following the patch "vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console" the port refcount is incremented while the vt is open. Reproducer (very unreliable, but it worked for me after a few minutes): #include <fcntl.h> #include <linux/vt.h> int main() { int fd, nproc; struct vt_stat state; char ttyname[16]; fd = open("/dev/tty10", O_RDONLY); for (nproc = 1; nproc < 8; nproc *= 2) fork(); for (;;) { sprintf(ttyname, "/dev/tty%d", rand() % 8); close(open(ttyname, O_RDONLY)); ioctl(fd, VT_GETSTATE, &state); } } KASAN report: BUG: KASAN: use-after-free in vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline] BUG: KASAN: use-after-free in vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657 Read of size 4 at addr ffff888065722468 by task syz-vt2/132 CPU: 0 PID: 132 Comm: syz-vt2 Not tainted 5.6.0-rc5-00130-g089b6d3654916 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 Call Trace: [...] vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline] vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660 [...] Allocated by task 136: [...] kzalloc include/linux/slab.h:669 [inline] alloc_tty_struct+0x96/0x8a0 drivers/tty/tty_io.c:2982 tty_init_dev+0x23/0x350 drivers/tty/tty_io.c:1334 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline] tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035 [...] Freed by task 41: [...] kfree+0xbf/0x200 mm/slab.c:3757 free_tty_struct+0x8d/0xb0 drivers/tty/tty_io.c:177 release_one_tty+0x22d/0x2f0 drivers/tty/tty_io.c:1468 process_one_work+0x7f1/0x14b0 kernel/workqueue.c:2264 worker_thread+0x8b/0xc80 kernel/workqueue.c:2410 [...] Fixes: 4001d7b ("vt: push down the tty lock so we can see what is left to tackle") Cc: <stable@vger.kernel.org> # v3.4+ Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200322034305.210082-3-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

security_secid_to_secctx is called by the bpf_lsm hook and a successful return value (i.e 0) implies that the parameter will be consumed by the LSM framework. The current behaviour return success when the pointer isn't initialized when CONFIG_BPF_LSM is enabled, with the default return from kernel/bpf/bpf_lsm.c. This is the internal error: [ 1229.341488][ T2659] usercopy: Kernel memory exposure attempt detected from null address (offset 0, size 280)! [ 1229.374977][ T2659] ------------[ cut here ]------------ [ 1229.376813][ T2659] kernel BUG at mm/usercopy.c:99! [ 1229.378398][ T2659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 1229.380348][ T2659] Modules linked in: [ 1229.381654][ T2659] CPU: 0 PID: 2659 Comm: systemd-journal Tainted: G B W 5.7.0-rc5-next-20200511-00019-g864e0c6319b8-dirty #13 [ 1229.385429][ T2659] Hardware name: linux,dummy-virt (DT) [ 1229.387143][ T2659] pstate: 80400005 (Nzcv daif +PAN -UAO BTYPE=--) [ 1229.389165][ T2659] pc : usercopy_abort+0xc8/0xcc [ 1229.390705][ T2659] lr : usercopy_abort+0xc8/0xcc [ 1229.392225][ T2659] sp : ffff000064247450 [ 1229.393533][ T2659] x29: ffff000064247460 x28: 0000000000000000 [ 1229.395449][ T2659] x27: 0000000000000118 x26: 0000000000000000 [ 1229.397384][ T2659] x25: ffffa000127049e0 x24: ffffa000127049e0 [ 1229.399306][ T2659] x23: ffffa000127048e0 x22: ffffa000127048a0 [ 1229.401241][ T2659] x21: ffffa00012704b80 x20: ffffa000127049e0 [ 1229.403163][ T2659] x19: ffffa00012704820 x18: 0000000000000000 [ 1229.405094][ T2659] x17: 0000000000000000 x16: 0000000000000000 [ 1229.407008][ T2659] x15: 0000000000000000 x14: 003d090000000000 [ 1229.408942][ T2659] x13: ffff80000d5b25b2 x12: 1fffe0000d5b25b1 [ 1229.410859][ T2659] x11: 1fffe0000d5b25b1 x10: ffff80000d5b25b1 [ 1229.412791][ T2659] x9 : ffffa0001034bee0 x8 : ffff00006ad92d8f [ 1229.414707][ T2659] x7 : 0000000000000000 x6 : ffffa00015eacb20 [ 1229.416642][ T2659] x5 : ffff0000693c8040 x4 : 0000000000000000 [ 1229.418558][ T2659] x3 : ffffa0001034befc x2 : d57a7483a01c6300 [ 1229.420610][ T2659] x1 : 0000000000000000 x0 : 0000000000000059 [ 1229.422526][ T2659] Call trace: [ 1229.423631][ T2659] usercopy_abort+0xc8/0xcc [ 1229.425091][ T2659] __check_object_size+0xdc/0x7d4 [ 1229.426729][ T2659] put_cmsg+0xa30/0xa90 [ 1229.428132][ T2659] unix_dgram_recvmsg+0x80c/0x930 [ 1229.429731][ T2659] sock_recvmsg+0x9c/0xc0 [ 1229.431123][ T2659] ____sys_recvmsg+0x1cc/0x5f8 [ 1229.432663][ T2659] ___sys_recvmsg+0x100/0x160 [ 1229.434151][ T2659] __sys_recvmsg+0x110/0x1a8 [ 1229.435623][ T2659] __arm64_sys_recvmsg+0x58/0x70 [ 1229.437218][ T2659] el0_svc_common.constprop.1+0x29c/0x340 [ 1229.438994][ T2659] do_el0_svc+0xe8/0x108 [ 1229.440587][ T2659] el0_svc+0x74/0x88 [ 1229.441917][ T2659] el0_sync_handler+0xe4/0x8b4 [ 1229.443464][ T2659] el0_sync+0x17c/0x180 [ 1229.444920][ T2659] Code: aa1703e2 aa1603e1 910a8260 97ecc860 (d4210000) [ 1229.447070][ T2659] ---[ end trace 400497d91baeaf51 ]--- [ 1229.448791][ T2659] Kernel panic - not syncing: Fatal exception [ 1229.450692][ T2659] Kernel Offset: disabled [ 1229.452061][ T2659] CPU features: 0x240002,20002004 [ 1229.453647][ T2659] Memory Limit: none [ 1229.455015][ T2659] ---[ end Kernel panic - not syncing: Fatal exception ]--- Rework the so the default return value is -EOPNOTSUPP. There are likely other callbacks such as security_inode_getsecctx() that may have the same problem, and that someone that understand the code better needs to audit them. Thank you Arnd for helping me figure out what went wrong. Fixes: 98e828a ("security: Refactor declaration of LSM hooks") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: James Morris <jamorris@linux.microsoft.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/bpf/20200512174607.9630-1-anders.roxell@linaro.org

When the nvmem framework is enabled, a nvmem device is created per mtd device/partition. It is not uncommon that a device can have multiple mtd devices with partitions that have the same name. Eg, when there DT overlay is allowed and the same device with mtd is attached twice. Under that circumstances, the mtd fails to register due to a name duplication on the nvmem framework. With this patch we use the mtdX name instead of the partition name, which is unique. [ 8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data' [ 8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13 [ 8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019 [ 8.948994] Call Trace: [ 8.948996] dump_stack+0x50/0x70 [ 8.948998] sysfs_warn_dup.cold+0x17/0x2d [ 8.949000] sysfs_do_create_link_sd.isra.0+0xc2/0xd0 [ 8.949002] bus_add_device+0x74/0x140 [ 8.949004] device_add+0x34b/0x850 [ 8.949006] nvmem_register.part.0+0x1bf/0x640 ... [ 8.948926] mtd mtd8: Failed to register NVMEM device Fixes: c4dfa25 ("mtd: add support for reading MTD devices via the nvmem API") Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at>

[ Upstream commit c2e929b ] Booting a power9 server with hash MMU could trigger an undefined behaviour because pud_offset(p4d, 0) will do, 0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10) Fix it by converting pud_index() and friends to static inline functions. UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15 shift exponent 34 is too large for 32-bit type 'int' CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13 Call Trace: dump_stack+0xf4/0x164 (unreliable) ubsan_epilogue+0x18/0x78 __ubsan_handle_shift_out_of_bounds+0x160/0x21c walk_pagetables+0x2cc/0x700 walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282 (inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311 ptdump_check_wx+0x8c/0xf0 mark_rodata_ro+0x48/0x80 kernel_init+0x74/0x194 ret_from_kernel_thread+0x5c/0x74 Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200306044852.3236-1-cai@lca.pw Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8dbe4c5 ] of_find_node_by_name() will do an of_node_put() on the "from" argument. With CONFIG_OF_DYNAMIC enabled which checks for device_node reference counts, we would be getting a warning like this: [ 6.347230] refcount_t: increment on 0; use-after-free. [ 6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156 refcount_inc_checked+0x38/0x44 [ 6.360601] Modules linked in: [ 6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G W 5.4.46-gb78b3e9956e6 #13 [ 6.372546] Hardware name: BCM97278SV (DT) [ 6.376649] Workqueue: events deferred_probe_work_func [ 6.381796] pstate: 60000005 (nZCv daif -PAN -UAO) [ 6.386595] pc : refcount_inc_checked+0x38/0x44 [ 6.391133] lr : refcount_inc_checked+0x38/0x44 ... [ 6.478791] Call trace: [ 6.481243] refcount_inc_checked+0x38/0x44 [ 6.485433] kobject_get+0x3c/0x4c [ 6.488840] of_node_get+0x24/0x34 [ 6.492247] of_irq_find_parent+0x3c/0xe0 [ 6.496263] of_irq_parse_one+0xe4/0x1d0 [ 6.500191] irq_of_parse_and_map+0x44/0x84 [ 6.504381] bcm_sf2_sw_probe+0x22c/0x844 [ 6.508397] platform_drv_probe+0x58/0xa8 [ 6.512413] really_probe+0x238/0x3fc [ 6.516081] driver_probe_device+0x11c/0x12c [ 6.520358] __device_attach_driver+0xa8/0x100 [ 6.524808] bus_for_each_drv+0xb4/0xd0 [ 6.528650] __device_attach+0xd0/0x164 [ 6.532493] device_initial_probe+0x24/0x30 [ 6.536682] bus_probe_device+0x38/0x98 [ 6.540524] deferred_probe_work_func+0xa8/0xd4 [ 6.545061] process_one_work+0x178/0x288 [ 6.549078] process_scheduled_works+0x44/0x48 [ 6.553529] worker_thread+0x218/0x270 [ 6.557285] kthread+0xdc/0xe4 [ 6.560344] ret_from_fork+0x10/0x18 [ 6.563925] ---[ end trace 68f65caf69bb152a ]--- Fix this by adding a of_node_get() to increment the reference count prior to the call. Fixes: afa3b59 ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7b01b72 ] When the nvmem framework is enabled, a nvmem device is created per mtd device/partition. It is not uncommon that a device can have multiple mtd devices with partitions that have the same name. Eg, when there DT overlay is allowed and the same device with mtd is attached twice. Under that circumstances, the mtd fails to register due to a name duplication on the nvmem framework. With this patch we use the mtdX name instead of the partition name, which is unique. [ 8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data' [ 8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13 [ 8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019 [ 8.948994] Call Trace: [ 8.948996] dump_stack+0x50/0x70 [ 8.948998] sysfs_warn_dup.cold+0x17/0x2d [ 8.949000] sysfs_do_create_link_sd.isra.0+0xc2/0xd0 [ 8.949002] bus_add_device+0x74/0x140 [ 8.949004] device_add+0x34b/0x850 [ 8.949006] nvmem_register.part.0+0x1bf/0x640 ... [ 8.948926] mtd mtd8: Failed to register NVMEM device Fixes: c4dfa25 ("mtd: add support for reading MTD devices via the nvmem API") Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c2e929b ] Booting a power9 server with hash MMU could trigger an undefined behaviour because pud_offset(p4d, 0) will do, 0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10) Fix it by converting pud_index() and friends to static inline functions. UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15 shift exponent 34 is too large for 32-bit type 'int' CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13 Call Trace: dump_stack+0xf4/0x164 (unreliable) ubsan_epilogue+0x18/0x78 __ubsan_handle_shift_out_of_bounds+0x160/0x21c walk_pagetables+0x2cc/0x700 walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282 (inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311 ptdump_check_wx+0x8c/0xf0 mark_rodata_ro+0x48/0x80 kernel_init+0x74/0x194 ret_from_kernel_thread+0x5c/0x74 Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200306044852.3236-1-cai@lca.pw Signed-off-by: Sasha Levin <sashal@kernel.org>

The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a783 ("perf test: Test pmu-events aliases") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4 ("perf tools: Add test_generic_metric function") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The metricgroup__add_metric() can find multiple match for a metric group and it's possible to fail. Also it can fail in the middle like in resolve_metric() even for single metric. In those cases, the intermediate list and ids will be leaked like: Direct leak of 3 byte(s) in 1 object(s) allocated from: #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683 #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906 #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940 #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993 #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045 #6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087 #7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164 #8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196 #9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318 #10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356 #11 0x55f7e70be09b in run_test tests/builtin-test.c:410 #12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 22fe5a2 ] The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a783 ("perf test: Test pmu-events aliases") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b12eea5 ] The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b12eea5 ] The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ca2ef4f ] A kernel built with KASAN && FTRACE_WITH_REGS && !MODULES, produces a boot-time splat in the bowels of ftrace: | [ 0.000000] ftrace: allocating 32281 entries in 127 pages | [ 0.000000] ------------[ cut here ]------------ | [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2019 ftrace_bug+0x27c/0x328 | [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc3-00008-g7f08ae53a7e3 #13 | [ 0.000000] Hardware name: linux,dummy-virt (DT) | [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) | [ 0.000000] pc : ftrace_bug+0x27c/0x328 | [ 0.000000] lr : ftrace_init+0x640/0x6cc | [ 0.000000] sp : ffffa000120e7e00 | [ 0.000000] x29: ffffa000120e7e00 x28: ffff00006ac01b10 | [ 0.000000] x27: ffff00006ac898c0 x26: dfffa00000000000 | [ 0.000000] x25: ffffa000120ef290 x24: ffffa0001216df40 | [ 0.000000] x23: 000000000000018d x22: ffffa0001244c700 | [ 0.000000] x21: ffffa00011bf393c x20: ffff00006ac898c0 | [ 0.000000] x19: 00000000ffffffff x18: 0000000000001584 | [ 0.000000] x17: 0000000000001540 x16: 0000000000000007 | [ 0.000000] x15: 0000000000000000 x14: ffffa00010432770 | [ 0.000000] x13: ffff940002483519 x12: 1ffff40002483518 | [ 0.000000] x11: 1ffff40002483518 x10: ffff940002483518 | [ 0.000000] x9 : dfffa00000000000 x8 : 0000000000000001 | [ 0.000000] x7 : ffff940002483519 x6 : ffffa0001241a8c0 | [ 0.000000] x5 : ffff940002483519 x4 : ffff940002483519 | [ 0.000000] x3 : ffffa00011780870 x2 : 0000000000000001 | [ 0.000000] x1 : 1fffe0000d591318 x0 : 0000000000000000 | [ 0.000000] Call trace: | [ 0.000000] ftrace_bug+0x27c/0x328 | [ 0.000000] ftrace_init+0x640/0x6cc | [ 0.000000] start_kernel+0x27c/0x654 | [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x30/0x60 with crng_init=0 | [ 0.000000] ---[ end trace 0000000000000000 ]--- | [ 0.000000] ftrace faulted on writing | [ 0.000000] [<ffffa00011bf393c>] _GLOBAL__sub_D_65535_0___tracepoint_initcall_level+0x4/0x28 | [ 0.000000] Initializing ftrace call sites | [ 0.000000] ftrace record flags: 0 | [ 0.000000] (0) | [ 0.000000] expected tramp: ffffa000100b3344 This is due to an unfortunate combination of several factors. Building with KASAN results in the compiler generating anonymous functions to register/unregister global variables against the shadow memory. These functions are placed in .text.startup/.text.exit, and given mangled names like _GLOBAL__sub_{I,D}_65535_0_$OTHER_SYMBOL. The kernel linker script places these in .init.text and .exit.text respectively, which are both discarded at runtime as part of initmem. Building with FTRACE_WITH_REGS uses -fpatchable-function-entry=2, which also instruments KASAN's anonymous functions. When these are discarded with the rest of initmem, ftrace removes dangling references to these call sites. Building without MODULES implicitly disables STRICT_MODULE_RWX, and causes arm64's patch_map() function to treat any !core_kernel_text() symbol as something that can be modified in-place. As core_kernel_text() is only true for .text and .init.text, with the latter depending on system_state < SYSTEM_RUNNING, we'll treat .exit.text as something that can be patched in-place. However, .exit.text is mapped read-only. Hence in this configuration the ftrace init code blows up while trying to patch one of the functions generated by KASAN. We could try to filter out the call sites in .exit.text rather than initializing them, but this would be inconsistent with how we handle .init.text, and requires hooking into core bits of ftrace. The behaviour of patch_map() is also inconsistent today, so instead let's clean that up and have it consistently handle .exit.text. This patch teaches patch_map() to handle .exit.text at init time, preventing the boot-time splat above. The flow of patch_map() is reworked to make the logic clearer and minimize redundant conditionality. Fixes: 3b23e49 ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Torsten Duwe <duwe@suse.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Like evlist cpu map, evsel's cpu map should have a proper refcount. As it's created with a refcount, we don't need to get an extra count. Thanks to Arnaldo for the simpler suggestion. This, together with the following patch, fixes the following ASAN report: Direct leak of 840 byte(s) in 70 object(s) allocated from: #0 0x7fe36703f628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x559fbbf611ca in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x559fbbf6229c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x559fbbcc6c6d in __add_event util/parse-events.c:357 #4 0x559fbbcc6c6d in add_event_tool util/parse-events.c:408 #5 0x559fbbcc6c6d in parse_events_add_tool util/parse-events.c:1414 #6 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #7 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #8 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #9 0x559fbbc2788b in check_parse_id tests/pmu-events.c:406 #10 0x559fbbc2788b in check_parse_id tests/pmu-events.c:393 #11 0x559fbbc2788b in check_parse_fake tests/pmu-events.c:436 #12 0x559fbbc2788b in metric_parse_fake tests/pmu-events.c:553 #13 0x559fbbc27e2d in test_parsing_fake tests/pmu-events.c:599 #14 0x559fbbc27e2d in test_parsing_fake tests/pmu-events.c:574 #15 0x559fbbc0109b in run_test tests/builtin-test.c:410 #16 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #17 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #18 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #19 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #20 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #21 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #22 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #23 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 And I've failed which commit introduced this bug as the code was heavily changed since then. ;-/ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200917060219.1287863-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ensure 'st' is initialized before an error branch is taken. Fixes test "67: Parse and process metrics" with LLVM msan: ==6757==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x5570edae947d in rblist__exit tools/perf/util/rblist.c:114:2 #1 0x5570edb1c6e8 in runtime_stat__exit tools/perf/util/stat-shadow.c:141:2 #2 0x5570ed92cfae in __compute_metric tools/perf/tests/parse-metric.c:187:2 #3 0x5570ed92cb74 in compute_metric tools/perf/tests/parse-metric.c:196:9 #4 0x5570ed92c6d8 in test_recursion_fail tools/perf/tests/parse-metric.c:318:2 #5 0x5570ed92b8c8 in test__parse_metric tools/perf/tests/parse-metric.c:356:2 #6 0x5570ed8de8c1 in run_test tools/perf/tests/builtin-test.c:410:9 #7 0x5570ed8ddadf in test_and_print tools/perf/tests/builtin-test.c:440:9 #8 0x5570ed8dca04 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #9 0x5570ed8dbc07 in cmd_test tools/perf/tests/builtin-test.c:807:9 #10 0x5570ed7326cc in run_builtin tools/perf/perf.c:313:11 #11 0x5570ed731639 in handle_internal_command tools/perf/perf.c:365:8 #12 0x5570ed7323cd in run_argv tools/perf/perf.c:409:2 #13 0x5570ed731076 in main tools/perf/perf.c:539:3 Fixes: commit f5a5657 ("perf test: Fix memory leaks in parse-metric test") Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20200923210655.4143682-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This fix is for a failure that occurred in the DWARF unwind perf test. Stack unwinders may probe memory when looking for frames. Memory sanitizer will poison and track uninitialized memory on the stack, and on the heap if the value is copied to the heap. This can lead to false memory sanitizer failures for the use of an uninitialized value. Avoid this problem by removing the poison on the copied stack. The full msan failure with track origins looks like: ==2168==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 linux-surface#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 linux-surface#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 linux-surface#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 linux-surface#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 linux-surface#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 linux-surface#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 linux-surface#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) linux-surface#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 linux-surface#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 linux-surface#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 linux-surface#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 linux-surface#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 linux-surface#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 linux-surface#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 linux-surface#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 linux-surface#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 linux-surface#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 linux-surface#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 linux-surface#23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22 #1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13 #2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 linux-surface#5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 linux-surface#6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 linux-surface#7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 linux-surface#8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 linux-surface#9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 linux-surface#10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 linux-surface#11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 linux-surface#12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) linux-surface#13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 linux-surface#14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 linux-surface#15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 linux-surface#16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 linux-surface#17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 linux-surface#18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 linux-surface#19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 linux-surface#20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 linux-surface#21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 linux-surface#22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 linux-surface#23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 linux-surface#24 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 linux-surface#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 linux-surface#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 linux-surface#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 linux-surface#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 linux-surface#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 linux-surface#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 linux-surface#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) linux-surface#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 linux-surface#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 linux-surface#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 linux-surface#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 linux-surface#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 linux-surface#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 linux-surface#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 linux-surface#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 linux-surface#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 linux-surface#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 linux-surface#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 linux-surface#23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10 #1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13 #2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18 #3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 linux-surface#5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 linux-surface#6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 linux-surface#7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 linux-surface#8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 linux-surface#9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 linux-surface#10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 linux-surface#11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 linux-surface#12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 linux-surface#13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) linux-surface#14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 linux-surface#15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 linux-surface#16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 linux-surface#17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 linux-surface#18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 linux-surface#19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 linux-surface#20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 linux-surface#21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 linux-surface#22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 linux-surface#23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 linux-surface#24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 linux-surface#25 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3 #1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2 #2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9 #3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6 #4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 linux-surface#5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) linux-surface#6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 linux-surface#7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 linux-surface#8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 linux-surface#9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 linux-surface#10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 linux-surface#11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 linux-surface#12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 linux-surface#13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 linux-surface#14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 linux-surface#15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 linux-surface#16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 linux-surface#17 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events' #0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445 SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: clang-built-linux@googlegroups.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandeep Dasgupta <sdasgup@google.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201113182053.754625-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should be released after printing the map. $ perf test -v 52 52: Print cpu map : --- start --- test child forked, pid 172233 ================================================================= ==172233==ERROR: LeakSanitizer: detected memory leaks Direct leak of 156 byte(s) in 1 object(s) allocated from: #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102 #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120 #5 0x55e63afff8fb in run_test tests/builtin-test.c:428 #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458 #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679 #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825 #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s). test child finished with 1 ---- end ---- Print cpu map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should release the maps at the end. $ perf test -v 71 71: Convert perf time to TSC : --- start --- test child forked, pid 178744 mmap size 528384B 1st event perf time 59207256505278 tsc 13187166645142 rdtsc time 59207256542151 tsc 13187166723020 2nd event perf time 59207256543749 tsc 13187166726393 ================================================================= ==178744==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73 #6 0x55b6209828fb in run_test tests/builtin-test.c:428 #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458 #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679 #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825 #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Convert perf time to TSC: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I got a segfault when using -r option with event groups. The option makes it run the workload multiple times and it will reuse the evlist and evsel for each run. While most of resources are allocated and freed properly, the id hash in the evlist was not and it resulted in the bug. You can see it with the address sanitizer like below: $ perf stat -r 100 -e '{cycles,instructions}' true ================================================================= ==693052==ERROR: AddressSanitizer: heap-use-after-free on address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8 WRITE of size 8 at 0x6080000003d0 thread T0 #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644 #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237 #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244 #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285 #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765 #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782 #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895 #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014 #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446 #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308 #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9) Actually the nodes in the hash table are struct perf_stream_id and they were freed in the previous run. Fix it by resetting the hash. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 4d14c5c upstream Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d14c5c upstream Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bpftool used to issue forward declarations for a struct used as part of a pointer to array, which is invalid. Add a test to check that the struct is fully defined in this case: @@ -134,9 +134,9 @@ }; }; -struct struct_in_array {}; +struct struct_in_array; -struct struct_in_array_typed {}; +struct struct_in_array_typed; typedef struct struct_in_array_typed struct_in_array_t[2]; @@ -189,3 +189,7 @@ struct struct_with_embedded_stuff _14; }; +struct struct_in_array {}; + +struct struct_in_array_typed {}; + ... #13/1 btf_dump: syntax:FAIL Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210319112554.794552-3-jean-philippe@linaro.org

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100/0x480 [ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.362175 ] ? vprintk+0x76/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Dumping ftrace buffer: [ 3.362175 ] (ftrace buffer empty) [ 3.362175 ] Kernel Offset: disabled [ 3.362175 ] Rebooting in 1 seconds.. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit 9f6f852 ] 'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100/0x480 [ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.362175 ] ? vprintk+0x76/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Dumping ftrace buffer: [ 3.362175 ] (ftrace buffer empty) [ 3.362175 ] Kernel Offset: disabled [ 3.362175 ] Rebooting in 1 seconds.. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

ztuowen added 4 commits October 27, 2019 23:29

docs: driver-model: add devm_ioremap_uc

aceca89

Signed-off-by: Tuowen Zhao <ztuowen@gmail.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org>

qzed merged commit fe380f8 into v5.3-surface-devel Oct 28, 2019

qzed deleted the v5.3-lpss-fix branch October 28, 2019 00:23

Hugal31 mentioned this pull request Oct 28, 2019

Surface Pro 7 (2019) jakeday/linux-surface#589

Open

kitakar5525 mentioned this pull request Jan 16, 2020

Backporting 5.3/5.4 changes into 4.19 #31

Closed

7 tasks

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix: Kernel panic at boot due to incorrect BAR specification for intel-lpss-pci#13

Fix: Kernel panic at boot due to incorrect BAR specification for intel-lpss-pci#13
qzed merged 4 commits intov5.3-surface-develfrom
v5.3-lpss-fix

qzed commented Oct 28, 2019

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

qzed commented Oct 28, 2019

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants